EDIT
Editing is modifying a sound, effect, or musical data in the
sequencer.
Effects
The TD-10 has a variety of digital effects such as reverb,
delay, flanger, chorus, and phaser.It’s sometimes abbreviat-
ed in the TD-10’s display as “FX.”
Equalizer (EQ)
An equalizer usually divides sound into high, mid & low
frequency ranges, allowing their balance to be adjusted. The
TD-10 provides 2-band equalizers for the instruments (not
usable with instruments assigned to the AUX1, 2 jacks), and
a 3-band equalizer for the total sound of the TD-10.
Expansion Board
This is a board (optional) containing more instrumental
sounds to be added to the TD-10, and is installed in the slot
on the bottom panel.
FD-7
A hi-hat controller pedal.
Foot Switch
A separately sold foot switch (BOSS FS-5U) can be used to
select kits, and perform operations such as sequencer play-
back/stop etc.
FS-5U
A general-purpose pedal that can be used with the TD-10,
and as a foot switch for other devices or instruments.
FX
This is an abbreviation for EFFECTS, indicating the on board
effects unit.
FX Send Level
This adjusts the volume of the instrument sent to the effect
unit.
Function Buttons
These are the four buttons [F1][F2][F3][F4] located below the
display. The function of these buttons will change depend-
ing on what’s in the screen, and the names of their current
functions are shown in the bottom of the display.
Hi-Hat Control Pedal (FD-7)
A pedal for controlling the hi-hat.
INC Button
Each time this button is pressed, the on-screen value at the
cursor location will increase in steps of 1, useful when mak-
ing fine adjustments. When making on/off settings, pressing
this button will turn the setting ON. If making large changes
in the value of a setting, the VALUE dial is quicker.
Initialize
This operation returns all settings to their factory values.
INST
This refers to whole family of drum and percussion sounds.
(In the case of “parts” used in a pattern,they are referred to
with their actual names such as piano, guitar etc.)
KD-7
This is a Kick Trigger Unit. (ROLAND)
Kick Trigger Unit
A kick drum triggering device.
M-512E
A memory card that can be used with the TD-10, and other
Roland instruments.
MASTER OUTPUT
These jacks output all sounds as well as the TD-10’s internal
effects. (Except when using individual outputs of course)
MEMORY CARD
An external storage media on which TD-10 drum kits or
sequencer data can be saved. It is inserted into the memory
card slot (MEMORY CARD) located on the rear panel of the
TD-10. The TD-10 can use “M-512E” memory cards.
MIDI (Musical Instrument Digital Interface)
An international standard for allowing electronic musical
instruments to communicate. Virtually all electronic musical
instruments sold today support MIDI, allowing those instru-
ments (even ones made by manufacturers other than
Roland) to be used to play the TD-10. Pads connected to the
TD-10 can also play external sound modules or samplers as
well via MIDI.
MIDI connector
These connectors are used to expand the TD-10’s functionali-
ty, such as synchronizing (the tempo) with other devices, to
record performances, and to store data. Use a MIDI cable to
connect other MIDI-compatible instruments or devices to the
TD-10. MIDI connectors are used ONLY if you are using an
external MIDI device.
Glossary
170