MIDI Buffer Full !
A large amount of MIDI messages were received in a short
time, and could not be processed completely. Make sure that
a problem has not occurred with the MIDI cable connection
or with your external MIDI device.
Data Overload
Pattern contained an excessive amount of data, and as a
result could not be output successfully from MIDI OUT. Try
eliminating a track that has too much data.
MIDI Offline !
A MIDI cable was disconnected. (Or communication with
the external MIDI device stopped for some reason.)
PATTERN DATA Not enough memory !
The internal memory for pattern storage is full. Save the pat-
terns either to a memory card (p. 114) or to an external
device via bulk dump, (p. 121) and then delete some or all of
the internal patterns (p. 105).
SYSTEM ERROR
A problem has occurred with the internal system. Contact
your dealer or a nearby Roland service center.
SYSTEM INITIALIZE Completed !
Initialization of the TD-10’s internal data has been complet-
ed.
No Empty Pattern
There are no more empty patterns. Clear unneeded patterns
before using this function (p. 105).
Not Enough Memory
Pattern recording or editing could not be carried out because
there was not enough internal memory. Try again after
deleting patterns that are no longer needed.
Message / error message list
139
Appendices