Roland TD-10 important safety instructions 1 2 3

Turning on the power
Once the connections have been completed (p. 23, 24), turn on power to your various devices in the order spec-
ified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and
other devices.
fig.00-013
1Rotate [MASTER] and [PHONES] all the way to the left to turn down the volume.
2Turn down the volume of the connected amp or audio system.
3Turn on the POWER switch located on the rear panel of the TD-10.
Caution when turning on the power
●After turning on the power, do not press the hi-hat control pedal (FD-7) until the drum kit
name (see the following illustration) appears in the display.
If the pedal was pressed while the power was being turned on, hi-hat open/close operations cannot be per-
formed correctly.
●After turning on the power, do not strike a pad until the drum kit name appears in the dis-
play.
Striking a pad while the power is being turned on will cause poor response when the pad is struck softly.
fig.00-037
NOTE
5
3
6
1
NOTE
Before you begin playing
26