How to select pads
When making settings, you can specify the pad in one of the following two ways.

■Using pads to select the pad/sound for editing

Strike the head (the head and rim simultaneously) of the pad. The setting display for the pad you
struck will appear. Listen to the sound as you strike the head (the head and rim simultaneously),
and use [INC/DEC] or the VALUE dial to modify the setting.

■Using the TD-10 to select the pad/sound for editing

Use the “1” button or “12” button located below [TRIG SELECT] to select a trigger signal(corre-
sponds to the 12 trigger inputs). To edit the rim settings, press [RIM] to make the indicator light.
When using [PREVIEW] to audition a sound, use [INC/DEC] or the VALUE dial to modify the set-
ting.
* When separate settings can be made for the head and the rim, a display such as the following will appear.
For details refer to p. 136.
fig.01-03
In this owner’s manual, a symbol such as the following will mark functions that can be set independently for
head and rim.
fig.(H)(R)
Head settings Rim settings
Chapter 1. Overview of the TD-10 V-drums
77
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10