Connect your audio system or amp
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
fig.00-010e
Connect the rear panel MASTER L(MONO) and R jacks to your audio system or amps. If you will be
using headphones, connect them to the PHONES jack.
Be sure that the TD-10’s MASTER L and R jacks are connected respectively to the L and R of your audio sys-
tem or amps.
In consideration of live performance situations, the headphone output is designed to produce a higher volume
than other electronic musical instruments. Extended listening at high volumes will damage your hearing, so
please pay attention to the volume adjustment.
At the factory settings, no sound will be output from the DIRECT 1, DIRECT 2 or DIRECT 3 jacks.
NOTE
to AC
power outlet Stereo headphones
Power cord
Audio cable
Audio set, etc.
RL
NOTE
MEMO
Before you begin playing
23
Quick Start