29

Chapter 1. Drum Kit Settings [KIT]

Chapter 1
[KIT]

1.

Press [KIT] - [F2 (FUNC)].

2.

Press [F1]–[F3] and [CURSOR (up/down)] to

select the parameter.

3.

Use [+/-] or [VALUE] to make settings.

fig.01-003_70

Each kit can have an individual tempo setting.
When you select a kit of which Kit Tempo is set to “ON,” the
tempo you define here will be set automatically.

fig.01-004_70

When you select a kit of which Kit Tempo is set to “ON,”
the defined tempo appears in the upper right of the
display.

fig.01-004a_70

In each kit, you can choose whether sticks or brushes will be
used.

fig.01-005_70

When Brush Switch is set to “ON,” the brush icon
appears in the “DRUM KIT” screen.

fig.01-005_70

You can check the output level from the selected jacks.
Use [+/-] or [VALUE] to choose the jacks.
Choose from: Master, Phones, and separate stereo outs.

fig.01-005a_70

Kit Parameters [F2 (FUNC)]

Adjusting the Volume [F1 (VOLUME)]

Parameter Value Description

Kit Volume 0–127 Volume of the entire drum
kit
Pedal HH Volume 0–127 Volume of the hi-hat’s foot
closed sound
XStick Volume 0–127 Volume of cross stick sound

Assigning a Tempo for Each Kit

[F2 (TEMPO)]

Parameter Value Description

Kit Tempo OFF, ON

OFF:

tempo is not defined

ON:

tempo is defined
Tempo 20–260 defined tempo

Playing Brushes [F3 (BRUSH)]

Parameter Value Description

Brush
Switch
OFF, ON

OFF:

for using sticks

ON:

for using brushes

Output Level Monitor [F5 (MONITOR)]

TD-20_Ref_e.book 29 ページ ２００５年５月２５日　水曜日　午前９時４９分