35

Chapter 2. Drum Instrument Settings [INST]

Chapter 2
[INST]

1.

Press [INST] - [F3 (CONTROL)].

2.

Strike a pad.

The settings screen for the struck pad appears.
You can select by using [TRIG SELECT].

3.

Press [F1]–[F5] and [CURSOR (up/down)] to

select the parameter.

4.

Use [+/-] or [VALUE] to adjust settings.

5.

When finished, press [EXIT] to return to the

“INST” screen.

This function starts playback of a pattern when a pad is struck.
This function provides a very convenient way to use patterns
during a live performance.
If different patterns have been assigned to two or more pads,
striking another pad while a pattern is playing back will cause
pattern playback to switch to the newly selected pattern.

* Performances using the Pad Pattern function cannot be
recorded to sequencers.

Pad Pattern:

OFF, P 1–100, U 101–200
Selects the played back pattern when the pad is struck.

* If all pads are set to “OFF,” icon appears.

Pad Ptn Velocity:

OFF, ON

OFF:

The pattern plays back at the velocity set for the pattern,
regardless of the strength with which the pad is struck.

ON:

The pattern plays back with the velocity changing in
response to the strength with which the pad is struck.

Tap Ptn Mute Grp:

OFF, 1–8
In Tap playback (p. 58), if one sound (pattern) is set to
play before the previous sound (pattern) has finished
playing, this setting allows you to either have the
previous sound stop and the subsequent sound start
playing or have the two sounds layered.

Patterns set to the same number:

The previous sound stops while in progress, and the
subsequent sound (pattern) starts playing.

Patterns set to the different numbers:

The previous sound continues to play to the end, while
the subsequent sound (pattern) is superimposed on it.
This setting allows you use the hi-hat pedal as a pitch bender
for sounds assigned to any pad or rim.
Specified in semitone steps.

Pedal Bend Range:

-24–0– +24

Using Pads/Pedal as Controllers [F3 (CONTROL)]

Parameter Value Description
[F1 (PATTERN)]

Pad Pattern OFF, P 1–100,
U 101–200
Refer to

Playing a Pattern
by Hitting a Pad (Pad Pat-
tern) [F1 (PATTERN)]

(p.
35).
Pad Ptn Ve-
locity
OFF, ON
Tap Ptn
Mute Grp
OFF, 1–8

[F2 (PDLBEND)]

Pedal Bend
Range
-24–0– +24 Refer to

Changing the
Pitch with the Hi-Hat Ped-
al [F2 (PDLBEND)]

(p. 35).

[F3 (MIDI)]

Tx Channel CH1–CH16,
GLOBAL
Refer to
MIDI Settings for
Each Pad [F3 (MIDI)]
(p.
36).
Note No. 0 (C -)–127
(G9), OFF
Gate Time 0.1–8.0 (s)
Position
Ctrl Sw
OFF, ON

[F4 (HH MIDI)]

Note No. 0 (C -)–127
(G9), OFF
Refer to
MIDI Note Num-
bers transmitted by Hi-
Hat [F4 (HH MIDI)]
(p. 36).
Gate 0.1–8.0 (s)

[F5 (BR MIDI)]

Brush Note
No.
0 (C -)–127
(G9), OFF
Refer to
MIDI Note Num-
ber transmitted by Brush
Sweep/Cross Stick [F5
(BR MIDI)]
(p. 36).
XStick Note
No.
0 (C -)–127
(G9), OFF

Playing a Pattern by Hitting a Pad

(Pad Pattern) [F1 (PATTERN)]

Changing the Pitch with the Hi-Hat

Pedal [F2 (PDLBEND)]

TD-20_Ref_e.book 35 ページ ２００５年５月２５日　水曜日　午前９時４９分