46

Chapter 5. Trigger Settings [TRIGGER]
1.
Press [TRIGGER] - [F3 (HI-HAT)].

[TRIGGER] lights, and the “TRIGGER HIHAT” screen
will appear.

fig.05-TrigHH_70

2.

Use [CURSOR (up/down)] to select the
parameter.
3.
Use [+/-] or [VALUE] to adjust the setting.
4.
When you’re finished, press [EXIT] to return to
the “DRUM KIT” screen.

• When Hi-Hat Type is set to “VH12”
• When Hi-Hat Type is set to “VH11/FD”

*1: When you control the pitch by Hi-Hat Pedal (p. 35), the
pitch can be changed smoothly if you set “High.”

1.

Press [TRIGGER] - [F3 (HI-HAT)].

2.

Press [F5 (OFFSET)].

The “VH OFFSET ADJUSTMENT” screen will appear.

fig.05-VHOffset1_70

3.

Loosen the clutch of the top hi-hat and let it sit
on the bottom hi-hat.

* Do NOT touch the hi-hats or the pedal.

4.

Press [F5 (EXECUTE)].

[TRIGGER] flashes, and the “VH offset” parameter is set
automatically.

fig.05-VHOffset2_70

When finished, [TRIGGER] stops flashing and remains
lit, and the following screen appears.

fig.05-VHOffset3_70

You can also perform this operation by holding down
[KIT] and pressing [TRIGGER] (p. 21).

1.

Connect the VH-11 and TD-20.

2.

After making the hi-hat settings, release your
foot from the pedal, and while keeping your foot
off the pedal, turn on the power to the TD-20.
3.
Loosen the clutch screw and let the hi-hat rest
naturally on the motion sensor unit.
4.
Press [TRIGGER] - [F1 (BANK)].

* [TRIGGER] lights, and the “TRIGGER BANK” screen
appears.

Hi-Hat Settings [F3 (HI-HAT)]

Parameter Value Description

Hi-Hat Type VH12,
VH11/FD
Used Hi-Hat Controller

VH12:

VH-12

VH11/FD:

VH-11, FD-8

Parameter Value Description

Offset -100– +100 Extent of Opening Hi-Hat
The bigger the value is,
the wider the opening
extent is.
Foot Splash
Sens
-10– +10

(Initial Value: +5)

Amount of how easy to
make the Foot Splash
Noise
Cancel
1–3

(Initial Value: 1)

Amount of strength to can-
cel the bow and edge noise
when you play “Foot
Close.”
The bigger the value is,
the more difficult to
have a noise excluding
the “Foot Close.”

Parameter Value Description

Foot Splash
Sens
-10– +10

(Initial Value: +8)

Amount of how easy to
make the Foot Splash
CC Max 90, 127

(Initial Value: 90)

Amount of Control
Change that is transmitted
in stepping the pedal down
completely.
CC
Resolution
NORMAL,
HIGH

(Initial Value:
NORMAL)

Amount of Data Resolu-
tion that is transmitted
from Hi-Hat Pedal. (*1)

Adjusting the Offset of VH-12

Automatically

Adjusting the Offset of VH-11

TD-20_Ref_e.book 46 ページ ２００５年５月２５日　水曜日　午前９時４９分