69
Chapter 8
[COPY]
Chapter 8. Copy Function [COPY]
You can copy drum kits, instruments, etc. to the destination of
your choice.
Copying will overwrite the data that was in the new
destination. So take caution when performing this
operation.
1.
Press [COPY].
[COPY] lights, and the “COPY” screen appears. If a
CompactFlash card is inserted into the CompactFlash
card slot, the CompactFlash indicator also lights (p. 70).
fig.08-CopyMenu_70
2.
Press [F1]–[F5] to select what you want to copy.
[F1 (KIT)]: drum kit
[F2 (INST)]: drum instrument
[F3 (PERC)]: percussion set
[F4 (TRIG)]: trigger bank
[F5 (CHAIN)]: drum kit chain
3.
Use [CURSOR], [+/-], or [VALUE] to select the
copy-source and the copy-destination.
fig.08-CopyParam_70
A:
copy-source type (PRESET, USER, or CARD)
B:
copy-source
C:
copy-destination
D:
backup containing the copy-source
(This appears when “CARD” is selected for the copy-
source type.)
E:
exchange button
(This appears when “USER” is selected for the copy-
source type.)
F:
copy-source pad
(This appears when copying a drum instrument.)
G:
copy-destination pad
(This appears when copying a drum instrument.)
4.
Press [F4] or [F5].
[F4 (EXCHNG)]:
The contents of the copy-source and copy-destination are
exchanged. (This can be selected when a “USER” data is
used for the copy-source.)
[F5 (COPY)]:
The previous content of the copy-destination is
overwritten by the content of the copy-source.
The confirmation screen appears. (Example: Copying a
drum kit)
fig.08-Confirm_70
* To cancel, press [F1 (EXIT)].
5.
Press [F5 (EXECUTE)] to carry out the
procedure.
“EXCHNG” is convenient for changing the order of data
in a sequence.
For details on copying a pattern, refer to p. 64.
AFD
CGE
B
TD-20_Ref_e.book 69 ページ 2005年5月25日 水曜日 午前9時49分