78

Chapter 10. Settings for the Entire TD-20 [SETUP]

Here you can select the output destination for each TRIGGER
INPUTs, sequencer parts, and the sound input from the MIX
IN jack.

1.

Press [SETUP].

[SETUP] lights.

2.

Press [F2 (OUTPUT)], and then Press [F1]–[F3]
to select the output destination jacks.

The “OUTPUT ASSIGN (MASTER)” or “OUTPUT
ASSIGN (DIRECT)” screen appears.
[F1 (MASTER)]: MASTER OUT jacks and PHONES jack
[F2 (DIR 1–4)]: DIRECT OUT 1–4 jacks
[F3 (DIR 5–8)]: DIRECT OUT 5–8 jacks

3.

Press TRIG SELECT [1], [15], [RIM], or
[CURSOR (left/right)] to select the TRIGGER
INPUT.

You can also select by striking the pad.

4.

Use [+/-], [VALUE], or [CURSOR (up/down)] to
select the output destination.

OUTPUT ASSIGN (MASTER) screen

fig.10-OutAsgn1_70

* You can restore all output destinations to factory settings
(L+R) by pressing [F5 (DEFAULT)] - [F5 (EXECUTE)].

OUTPUT ASSIGN (DIRECT) screen

fig.10-OutAsgn2_70

* You can restore all output destinations to factory settings by
pressing [F5 (DEFAULT)] - [F5 (EXECUTE)].

1.

Press [SETUP].

[SETUP] lights.

2.

Press [F3 (OUTPUT)] - [F4 (OTHER)].

The “OUTPUT ASSIGN (OTHER)” screen appears.

fig.10-OutAsgn3_70

3.

Press [CURSOR (left/right)] to select the
source.

AMB:

Ambience

MFX:

Multi-effects

BACK:

Backing parts of the sequencer

PERC:

Percussion part of the sequencer

CLICK:

Metronome click

MIXIN:

Sound input from the MIX IN jack

4.

Use [+/-], [VALUE], or [CURSOR (up/down)] to
select the output destination.

* You can restore all output destinations to factory settings
(MASTER and PHONES) by pressing [F5 (DEFAULT)] - [F5
(EXECUTE)].

Block Diagram

(p. 104)

Selecting Output Destinations [F2 (OUTPUT)]

Output Destination for the Drum

Instruments

Output Destination for the Sequencer

Parts/Metronome Click/Sound Input

from MIX IN [F4 (OTHER)]

TD-20_Ref_e.book 78 ページ ２００５年５月２５日　水曜日　午前９時４９分