Roland TD-20 Naming a Drum Kit [F3 (NAME)], Playing Cross Stick [F5 (XSTICK)]

30
Chapter 1. Drum Kit Settings [KIT]
Each kit’s name can use up to 12 characters.
fig.01-005_70
1. Press [KIT] - [F3 (NAME)].
The “DRUM KIT NAME” screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and
characters after this point are moved to the right one
space.
[F2 (DELETE)]
Character at the cursor position is deleted, and characters
after this point are moved to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank
space.
[F4 (CHAR)]
Type of character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
In each kit, you can choose to use/not use cross stick by
pressing [F5 (XStick)] in the “DRUM KIT” screen.
• Cross stick can be played
fig.01-007_70
• Cross stick not possible
fig.01-008_70
Naming a Drum Kit
[F3 (NAME)]
Playing Cross Stick
[F5 (XSTICK)]
TD-20_Ref_e.book 30 ページ ２００５年５月２５日 水曜日 午前９時４９分