80

Chapter 10. Settings for the Entire TD-20 [SETUP]

Pads connected to TRIGGER INPUT 15 (AUX4) and/or 14
(AUX3) can be set to switch drum kits and play back patterns.

1.

Connect the pad(s) to the TRIGGER INPUT 15
(AUX 4) and/or 14 (AUX3).
2.
Press [SETUP].

[SETUP] lights.

3.

Press [F3 (CONTROL)] - [F2 (PAD SW)].

The “PAD SWITCH” screen appears.

fig.10-PadSw_70

4.

Use [+/-] or [VALUE] to select the function.

5.

When setting to “USER,” press [CURSOR] to
move the cursor to “AUX3” and “AUX4.”

6.

Use [+/-] or [VALUE] to select the functions for
the heads and rims of AUX3 and AUX4.

• If you don’t want sound from the pad used as a pad
switch, press [MIXER] - [F1 (VOLUME)], and set the
volume level for AUX4 and/or AUX3 to “0” (p. 37). Or
press [INST] and select “561 Off” for AUX4 and/or AUX3
(p. 31).
• When using pad switches to switch kits in a Drum Kit
Chain (p. 82), FUNCTION should be set to “KIT SELECT
1” or “KIT SELECT 2,” and you need to press the
[CHAIN], so its indicator is lit. (The Drum Kit Chain
settings need to be made beforehand.)
Here, the [PREVIEW] velocity can be set.

1.

Press [SETUP].

[SETUP] lights.

2.

Press [F4 (OPTION)] - [F1 (PREVIEW)].

The “PREVIEW” screen appears.

fig.10-Preview_70

3.

Press [CURSOR (up/down)] to select the
parameter.

4.

Use [+/-] or [VALUE] to make settings.

You can specify which is used for the master effect (p. 43),
individual settings for each drum kit or common settings to all
kits.

1.

Press [SETUP].

[SETUP] lights.

Using Pads as Switches

[F2 (PAD SW)]

Function AUX3 AUX4
Head Rim Head Rim

OFF OFF OFF
KIT SELECT1 OFF KIT#
INC
KIT#
DEC
KIT SELECT2 KIT# DEC KIT# INC
CHAIN SELECT1 OFF CHAIN
# INC
CHAIN
# DEC
CHAIN SELECT2 CHAIN# DEC CHAIN# INC
PATTERN
SELECT1
OFF PTN#
INC
PTN#
DEC
PATTERN
SELECT2
PTN# DEC PTN# INC
USER Select from the table below.
OFF Turns off Pad Switch.
KIT# INC Calls up the next kit.
KIT# DEC Calls up the previous kit.
CHAIN# INC Calls up the next drum kit chain.
CHAIN# DEC Calls up the previous drum kit chain.
PTN# INC Calls up the next pattern.
PTN# DEC Calls up the previous pattern.
XSTICK SW Switches to use/not use cross stick.

Other Settings [F4 (OPTION)]

Preview Button Settings

[F1 (PREVIEW)]

parameter Value Description

Dynamics OFF,
ON

OFF:

No velocity. Level is fixed.

ON:

Button responds to velocity.
Velocity 1–127 Velocity when Dynamics is set to
“OFF.”

Master Effect Mode [F2 (COMP/EQ)]

TD-20_Ref_e.book 80 ページ ２００５年５月２５日　水曜日　午前９時４９分