TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check the lists below and on the next page before calling for assistance or service. If you still need help, see “Requesting Assistance or Service” on page 24.
RANGEDoEsNOTWORK
PROBLEM | CAUSE |
|
Nothing works | 0 The range | is not properly connected to the gas supply. Contact an authorized |
| Roper service technician to reconnect the range to the gas supply. (See the | |
| Installation | Instructions.) |
| 0 The control knob is not set correctly. Push in the control knobs before | |
| turning them. |
OVEN~BROIIIRBURNER
PROBLEM |
|
|
| CAUSE |
|
|
|
|
|
|
|
| |||
The | oven does |
|
| 0 | You have | not turned | the oven | temperature | control | knob | to a temperature | ||||
not | work |
|
|
|
| setting. |
|
|
|
|
|
|
|
| |
|
|
|
|
| 0 | The | gas shutoff valve is in the | off position. | (See the | Installation | Instructions.) | ||||
The | burner | fails | to | light | 0 | The | pilot | light is out. See “Lighting standing | pilots” | on page 7, contact an | |||||
|
|
|
|
|
| authorized Roper service technician, or see the Installation Instructions. | |||||||||
The | burner | flames | lift | 0 | The | air/gas mixture | is incorrect. | Contact | an authorized | Roper | service | ||||
away from | the | ports, |
| technician | to check | the air/gas | mixture | or see the | Installation | Instructions. | |||||
are yellow, or are noisy |
|
|
|
|
|
|
|
|
|
|
|
22