Roper FLP320E, FGP31OE, FGP320E warranty hl=UP COOKTOPANDSURFACEBURNERS

hl=UP COOKTOPANDSURFACEBURNERS

1.Remove the surface burner grates.

I 1 I

2.Lift the front of cooktop at both front corners until the support rods lock into place.

NOTE: Do not drop the cooktop. Damage could result to the porcelain and the cooktop frame.

3.Wipe the surface under the cooktop with warm,

pad on heavily soiled - areas.

4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20-30 min- utes. Then scrub them with a plastic scrubbing pad. (See page 17 for more information.)

Carbon Monoxide Poisoning Hazard

Do not operate with a yellow flame.

Doing so can result in death, heart attack, or convulsions.

5.Check the burner flames once in a while for proper size and shape as shown.

	Ports		A good flame is blue in
			color. If flames lift away
			from ports, are yellow,
		-l’Y--	or are noisy, turn off the
	-		burner.	Allow the	burner
yA	.v.v. .u.u.uq		to cool	and follow	Step 6.

-If you still have a problem, contact an authorized Whirlpool service techni-

cian to check the air/gas

mixture or see the Installation Instructions.

6.If the ports are clogged, clean with a straight

clog the ports.

I . I

18