Roper B875, MN11020(344197) To Set Self-Clean, To Interrupt, A Clean, CYCLE some models, Cycle

TO SET SELF-CLEAN	TO INTERRUPT	A CLEAN
CYCLE (some models)	CYCLE

P1 PUSH

i’

II1

UIW

CANCEL ‘. “”

STOP	BROlL BAKE	TIMER CLOCK sToPT,ME CLEAN ;fEK BROIL BAKE
TIMER CLOCK I,ME CLEAN T;;
mwm-		-mmmmmm

PUSH

Be sure oven door is closed

The door locks automatically after the controls are set

The self-clean cycle lasts 3-l 12 hours

Wh,en the oven reaches locking temperature the word LOCK will be shown in the ERC display.

You ‘can push STOP TIME BtJTTON to find out when the cycle will end. Push CLEAN BUTTON to return to count down.

WHEN A CLEAN CYCLE IS FINISHED

WAIT UNTIL 1 LOCK GOES OUT

(20-30 minutes)

?

Then follow instructions under WHEN A CLEAN CYCLE IS FINISHED.

TO SET DELAY SELF-CLEAN CYCLE

TURN TO SET OVEN

TURN OFF TIME

eEyr*

CANCEL	L
	T,UER CLOCK sro’T,ME CLEAN y;;	BROIL BAKE
	mmmmmmm
Ic	I	,J

PUSH 0 @ PUSH

STOPTIMEmust bemorethan3-112 hourslaterthancurrent time of day.

You can press and hold CLEAN button to find out when clean cycle will start

After a clean cycle, the oven door cannot be opened unless the word LOCK is off in the ERC display and the oven has cooled. If you cannot open the door immediately after the word LOCK goes off, wait about one minute and try again.

INCOMPLETE SETTINGS

Attention Tone will sound if CLEAN button is pushed and SET knob is not turned.

Display will show “door” if the oven door is not fully closed. Close the door and the cycle will resume.

18 CSCLO3-2