Configure KVM
Configure KVM
|
|
|
|
|
|
|
|
|
| ID | Bus | KVM name |
| Resolution | Start | User |
|
| 1 | 1 | KVM station | 1 | 640x480@60 | 0 | User 1 |
|
| 2 | 2 | KVM station | 2 | 640x480@60 | 0 | User 1 |
|
| 3 | 3 | KVM station | 3 | 640x480@60 | 0 | User 1 |
|
| 4 | 4 | KVM station | 4 | 640x480@60 | 0 | User 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Name of
Figure 20. Configure KVM menu
The “Configure KVM” menu allows you to change each selected KVMs name, resolution, start, and user parameters. The ID column indicates the physical location (port) the KVM is connected to. The BUS column is the KVM video bus number. These values are not user changeable.
KVM name (Default: KVM Station x)
To change the KVM name, select it from the menu and press [Enter]. An input box will display to enter a new KVM name. Type in a new name and press [Enter]. KVM names can be 16 characters in length, case sensitive.
Resolution (Default: 640x480@60Hz)
Selects the resolution and scan rate of the on-screen display when no attached computer video is present. If a computer video is shown, the detected video resolution from the connected computer is used.
To change the resolution for a selected KVM station, select the KVM station to change the resolution and using the left arrow key, select the resolution field and press [Enter]. A list of supported resolutions will display. Select the new resolution from the list and press [Enter]. The supported resolutions are:
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@67Hz
832x624@75Hz
1152x900@66Hz
1152x900@76Hz
30 |