Save menu
UltraMatrix version MX22 Rose Electronics Copyright
Main Menu
Configure
System
Computer
KVM
User
Profile
Group
Language
Status
Save
Exit
Boards to update = | 3 |
| No |
Save configuration? | Yes |
Use up/down arrow keys to choose selection then press the Enter key or the Escape key to exit
Sends configuration to system and saves to flash memory
Figure 26. Save menu
When changes are made to any configuration, they must be saved in flash memory to insure that the changes will be active after a power cycle. It is recommended that all users be logged off from all systems prior to saving any configuration changes. To save the settings, select save and press [Enter]. The UltraMatrix will check and display how many CPU cards in the system to update. This is the total number of CPU cards (RS232 ports) in the system not counting the one the KVM station is connected to. (Total boards – 1)
A YES/NO selection box will display.
Choose “YES” to save the changes to flash memory on all powered-on UltraMatrix switches.
Choose “NO” for temporary or incorrect changes. The temporary settings will only be in effect as long as power is applied to the Unit. Once power is cycled, unsaved changes, other than the starting computer number, are lost and the previously saved configuration settings will be effective.
38 |
