Hardware Pre-Configuration | NDC comm NWH2610, NWH6210 specification

Hardware Pre-Configuration

Before adding a Wireless Workgroup Bridge (WWB) or Wireless Ethernet Client (WEC) into an existing Ethernet network, you may need to set basic configurations, e.g. domain name (SSID), security setting (WEP), WWB (or WEC) name, channel number, or IP address in order to make it compatible with the existing network.

Follow the steps below to connect the WWB (or WEC) to a PC for configuration:

step1. Use a standard Ethernet cable to connect a PC to an Ethernet port on the WWB (or WEC)

step2. Power on the WWB (or WEC)

Install the InstantWave Management System

step1. Insert the InstantWave CD into the CD-ROM drive. The InstantWave CD main menu will open automatically

Figure 10. Welcome

step2. Click Install Utility to install the InstantWave Management System (IWMS) utility to your system

InstantWave 11Mbps WWB/WEC 27

Image 27

NDC comm NWH2610, NWH6210 manual Hardware Pre-Configuration, Install the InstantWave Management System

Contents

NDC World Wide Web User’s GuideNational Datacomm Corporation Technical Support Trademarks Packing List NWH6210 package should contain the following itemsNWH2610 package should contain the following items Table of Contents Upgrade Firmware EW /E DIT /D Elete a H OST a Ddress List of Figures Introduction InstantWave Wireless LAN Products InstantWave 11Mbps WWB/WEC Automatic Discovery of InstantWave Products Windows 95/98 Windows NTWindows 2000/XP System Requirements for the InstantWave Management System Regulatory Domain Terminology Used in this GuideDomain Name/SSID Roaming WEP How to Use this Guide Plan the wireless network Infrastructure Network Types Access PointWireless Computer-1 Computer-2 With WEC Plan the Network Single AP Network Multiple AP Network Planning WWB and WEC for your wireless network Complex Infrastructure network Single AP Installation Multiple AP InstallationPlanning an Infrastructure Network Roaming InstantWave 11Mbps WWB/WEC Color Function NWH6210 Panels and ConnectorsLED Indicators NWH6210 Hardware Description Connector Function Connectors NWH2610 Panels LED Indicators NWH2610 Install the InstantWave Management System Hardware Pre-Configuration Hosts View Using the InstantWave Management System Auto-Discovery Auto-Discovery Popup Menu Dhcp Configuration Configuration Dhcp Filter Static IP Configuration Configuration/Filter Configuration/Wireless Setting Wireless Setting Mode AuthenticationName Ssid Domain Ethernet/Fixed Address Ethernet Ethernet/Idle Time Idle Time Encryption Configuration/Encryption InstantWave 11Mbps WWB/WEC Configuration/SNMP Access Control Snmp Access Control New/Edit Address Trap Server Configuration/Trap Server Summary Information Monitor Monitor/Summary Wireless Statistics Monitor/Statistics Upgrade Firmware Upgrade Firmware Load Default Reset Partition the network according to the physical location Advanced SettingBatch mode operation Manage the Iwms Host Table Create a Host Table via Automatic Discovery New/Edit/Delete a Host Address on the Host Table Import Host Table to check device’s availability Import the Configuration Profile from a File Export a Configuration profile to a File Import the Configuration Profile from a File InstantWave Product Placement Guidelines HardwareMounting the WWB InstantWave 11Mbps WWB/WEC Symptom Suggested Solutions Troubleshooting InstantWave 11Mbps WWB/WEC Support from Your Network Supplier Technical Support Hardware NDC Limited Warranty Limited Warranty Service Procedures Services after Warranty Period Specifications Receiver Firmware UpgradeTemperature Transmitter MHz AppendixChannel Center Spain France Japan Number Frequency MAC ID Index WEP