Transmitter, Receiver, Antenna Type, Temperature | NDC comm NWH2610

Transmitter	RF Output Power: 20 dBm
	Frequency Stability: Within ± 25ppm
	Data Modulation Type:
	BPSK (1Mbps)/QPSK (2/5.5/11Mbps)
	Data Modulation Speed:
	11Mbps/5.5Mbps/2Mbps/1Mbps with Auto Fallback

Receiver	Sensitivity:	(Less than 8% of FER packet size is 1024
	bytes) - 83 dBm (Typical @11Mbps)

Antenna Type	NWH6210: Dual Dipole Diversity Antenna (fixed type or
	external type)
	NWH2610: Internal patch antenna
Software

SNMP Functions	Configuration and management via SNMP in a Windows
	environment through Ethernet.
	MIB II (RFC 1213), Bridge MIB (RFC 1493) Enterprise
	MIB
	Trap Filter

Security	Data encryption
	Access control
	Password assignment and rights

Firmware Upgrade	Firmware upgrade via Ethernet or wireless

Environment

Temperature	Operating:	0°C ~ +50°C (32°F ~ 122°F) (Except RF
	output power and sensitivity)
	Storage: -30°C ~ +70°C (-22°F ~ 158°F)

Humidity	85% at 40°C

InstantWave 11Mbps WWB/WEC 63

Image 63

NDC comm NWH2610, NWH6210 Transmitter, Receiver, Antenna Type, Snmp Functions, Firmware Upgrade, Temperature, Humidity

Contents

NDC World Wide Web User’s GuideNational Datacomm Corporation Technical Support Trademarks Packing List NWH6210 package should contain the following itemsNWH2610 package should contain the following items Table of Contents Upgrade Firmware EW /E DIT /D Elete a H OST a Ddress List of Figures Introduction InstantWave Wireless LAN Products InstantWave 11Mbps WWB/WEC Automatic Discovery of InstantWave Products Windows 95/98 Windows NTWindows 2000/XP System Requirements for the InstantWave Management System Regulatory Domain Terminology Used in this GuideDomain Name/SSID Roaming WEP How to Use this Guide Plan the wireless network Infrastructure Network Types Access PointWireless Computer-1 Computer-2 With WEC Plan the Network Single AP Network Multiple AP Network Planning WWB and WEC for your wireless network Complex Infrastructure network Single AP Installation Multiple AP InstallationPlanning an Infrastructure Network Roaming InstantWave 11Mbps WWB/WEC Color Function NWH6210 Panels and ConnectorsLED Indicators NWH6210 Hardware Description Connector Function Connectors NWH2610 Panels LED Indicators NWH2610 Install the InstantWave Management System Hardware Pre-Configuration Hosts View Using the InstantWave Management System Auto-Discovery Auto-Discovery Popup Menu Dhcp Configuration Configuration Dhcp Filter Static IP Configuration Configuration/Filter Configuration/Wireless Setting Wireless Setting Mode AuthenticationName Ssid Domain Ethernet/Fixed Address Ethernet Ethernet/Idle Time Idle Time Encryption Configuration/Encryption InstantWave 11Mbps WWB/WEC Configuration/SNMP Access Control Snmp Access Control New/Edit Address Trap Server Configuration/Trap Server Summary Information Monitor Monitor/Summary Wireless Statistics Monitor/Statistics Upgrade Firmware Upgrade Firmware Load Default Reset Partition the network according to the physical location Advanced SettingBatch mode operation Manage the Iwms Host Table Create a Host Table via Automatic Discovery New/Edit/Delete a Host Address on the Host Table Import Host Table to check device’s availability Import the Configuration Profile from a File Export a Configuration profile to a File Import the Configuration Profile from a File InstantWave Product Placement Guidelines HardwareMounting the WWB InstantWave 11Mbps WWB/WEC Symptom Suggested Solutions Troubleshooting InstantWave 11Mbps WWB/WEC Support from Your Network Supplier Technical Support Hardware NDC Limited Warranty Limited Warranty Service Procedures Services after Warranty Period Specifications Receiver Firmware UpgradeTemperature Transmitter MHz AppendixChannel Center Spain France Japan Number Frequency MAC ID Index WEP