When all the settings are made, click OK to return to the SNMP Access Control card.
Trap Server
Trap Management allows you to setup the configuration of the Trap Server program. When a WWB (or WEC) is powered on, or its Ethernet port becomes active, the WWB (or WEC) will send messages to the assigned trap server to report these activities.
To assign a trap server, click New/Edit Trap Server (Figure 23). Assign a station as a trap server by entering its IP address and network port type. Click OK.
To remove a trap server from the list, highlight it and click Delete. Click Delete All to remove all assigned trap servers from the list.
Figure 23. Configuration/Trap Server
When the WWB (or WEC) is powered on, or an Ethernet port becomes active, an event log will be generated indicating the time, the MAC ID of the reporting WWB
