8.Reset Button
a.Restores base station to factory settings:
i)Base Station security code
ii)Auto-Attendant (AA) configuration:
•On/Off, default = Off
•Number of rings before AA picks up, default = 2
•Custom greeting message cleared
•ID assigned to a phone line when AA is disabled, default = ID 10
iii)Operator ID, default = ID 10
iv)Registered handset ID table cleared
b.Call Forwarding table:
i)Call Forwarding On/Off for all registered handsets, default = Off
ii)Clear Call Forwarding numbers for all registered handsets
c.Transfer calls for
Notes:
1.Reset button is indented to prevent accidental system reset.
2.Because the base’s security code is reset and the handset registration table is cleared, all handsets (including administrator) and additional base(s) need to be
Additional Base Station Features
1.
a.4
23
b.Allows private paging to a single handset (with individual Handset ID) or group paging to a group of handsets (with Group ID).
c.Per line AA enable/disable by administrator.
d.When disabled for a line, the administrator can set all handsets to ring with an incoming call on that line, or a particular Handset/Group ID (either one; not simultaneously) can be assigned to have both incoming and outgoing call privileges on that line. See AA Configuration by Administrator.
e.Up to 128 seconds customizable main greeting message.
2.Optional Outdoor Antenna Kit with cable
3.Supports both DTMF and Pulse dialing
a.From an administrator handset (Handset 10 or 11), press
b.Default is Tone dialing.
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the same authority to perform base station administrative functions from their handset menu selections. No password is required and to remember.
1.
a.Sets number of rings before AA answers
b.Turns AA on/off for each of the 4 lines.
c.If AA is turned off, select from two options
i)Ring all registered handsets.
ii)Ring a particular Handset ID
24
