6.Caller ID
•Displays incoming call phone number and name on the LCD (needs Caller ID service from local telephone company)
7.Call waiting with Caller ID
•Displays 2nd incoming call information on the same phone line when 1st call is in progress (needs Call Waiting with Caller ID service from local telephone company)
8.Call Transfer
a. Direct Transfer: transfer a telephone call to another handset without announcement.
b. Announced Transfer: speak to the destination handset before transferring a telephone call.
9.Call Forwarding
a. Forward all incoming phone calls to another handset. b. Forward all incoming phone calls to another landline
or cellular phone number.
Note:
1.Once enabled from the handset, all phone calls will be routed to the designated number until disabled. A warning message will appear on the LCD.
2.Intercom calls are not forwarded.
10.Call Conferencing
a.
b.
11.DND (Do Not Disturb, i.e., Silent Ring)
12.Administrator programmable Flash key timing
a.From an administrator handset (Handset 10 or 11), press
17
b.
Note: The default value (600 ms) works in most areas. Changing this setting may cause Flash key not working. Change only when you are certain of the new value would work.
13.Three Call Logs
a.Called Log: Stores 10 phone numbers (up to 28 digits each) dialed most recently. Can perform last- number redial on all 10 numbers.
b.Received Call Log: 10 entries
c.Missed Call Log: 10 entries
d.Phone numbers and names can be saved into phonebook while in display.
14.Any Key Answer (except PWR, END, Silent Soft Key)
15.Keyguard
• Prevents accidental dialing.
16.Dialing Prefix
• Up to 14 digits, including pause(s), one access code can be
17.Call Hold
a.Places call on hold.
b.Change battery while call is on hold.
18.Mute
18
