EnGenius Technologies EP-490 user manual Obtain a Specific Handset ID, Handset Group Subscription

c.Press the number “9”, this will enter the handset administration menu.

d.Press number “2”, handset enters system setting menu.

e.Press number “1”, and enter the two-digit Handset ID to be cleared.

f.Upon successful operation, the handset LCD will display “Done”, otherwise it will show “Message not received, try again”.

Notes:

1.De-registration by the administrator will disable a handset’s ability to use the base station to make or receive phone calls. This also frees up the ID for future registration.

2.Handsets de-registered by the administrator can still perform intercom to other handsets.

4.Obtain a Specific Handset ID:

a.If a particular Handset ID is preferred over sequentially assigned ID, the administrator can “tell” the base in advance what the next ID assignment should be.

b.Press administrator handset Menu (Right) soft key.

c.Press the number “9”, this will enter the handset administration menu.

d.Press number “2”, handset enters system setting menu.

e.Press number “2”, and enter the two-digit Handset ID to be assigned next by the base.

f.Upon successful operation, the handset LCD will display “Done,” otherwise it will show “Message not received, try again.”

g.If the handset ID is already in use by another handset, the administrator will be alerted. In that case, the administrator can choose another ID or asks the handset having the desired ID to vacate by de-registering with the base.

39

h.Perform registration immediately afterward for the handset desiring a specific ID to ensure that the ID is not taken by another handset.

Handset Group Subscription

1.Up to nine handset groups (1-9) can be defined and handsets can decide which group(s) they want to be in.

2.For example, Group 1 represents the Customer Service Group, Group 2 represents the Sales Group, and Group 3 is the Marketing Group. Suppose that Handset 10 wants to receive incoming rings for all Sales and Marketing related calls in addition to calls addressed to his/her own Handset ID. Then handset 10 will need to “subscribe” to Group 2 and Group 3.

3.Group Selections:

a.Press handset Menu (Right) soft key.

b.Press the number “5”, this will enter the handset setting menu.

c.Press number “2”, handset enters group select menu.

d.Press ADD (Left) soft key and enter one-digit group number (1-9) to add membership in a group.

e.Repeat for all desired groups.

f.Delete group selections by pressing DELETE (Right) soft key and enter group number.

Notes:

1.The handset can change group affiliations at any time.

2.The base (administrator) is not responsible for group assignments. Consequently, it cannot de-subscribe a handset from a group.

3.When an outside line or an intercom caller enters a group ID, all handsets subscribed to this group will ring. The first handset to answer will establish a link with the caller. Afterward, it is a one-to-one call, not

40