Zenith HCS5610 warranty Installer Menu Items 035 through

Installer Menu (Continued)

Installer Menu Items 035 through 117

Menu Item	Function	Value Range	Default Value	Brief Description of Function and Comments
035	COMPPORT EN.	0 / 1	1	Set to 1 to enable HDMI. Set to 0 to disable.
036	FRONT Y/C EN.	0 / 1	1	Set to 1 to enable panel HDMI 2 input.
038	YPrPb EN.	0 / 1	1	Set to 1 to enable display panel Component 1 input jacks.
039	REAR AUX EN	0 / 1	1	Set to 1 to enable display panel Video 1 input jack.
046	STRT AUX SRCE	1 ~ 8, 255	255	Sets the starting AUX source.
047	AUX STATUS	0 / 1	0	Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
053	DIS. CH-TIME	0 / 1	0	Set to 1 to disable Channel-Time display.
069	EN. CH-T COL.	0 / 1	1	Set to 1 to enable custom color for the Text display.
070	FOR. CH-TIME	0 ~ 7	2	Chooses custom foreground color for the Text display.
071	BCK. CH-TIME	0 ~ 7	2	Chooses custom background color for the Text display.
073	CH NOT AVBLE	0 / 1	0	If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed
				when directly accessing a channel not in the favorite channel list.
075	REVERT CH	0 / 1	0	If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
078	UPN MSB	0 ~ 255	0	User programmable number, most significant byte.
079	UPN MSB-1	0 ~ 255	0	User programmable number, most significant byte - 1.
080	UPN MSB-2	0 ~ 255	0	User programmable number, most significant byte - 2.
081	UPN LSB	0 ~ 255	0	User programmable number, least significant byte.
082	CHKSM ERROR	0 / 1	1	Enforces rigid M.P.I. checksum.
083	HANDSHK TIME	0 ~ 5	5	Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084	PERMANENT BLK	0 / 1	0	Removes block hours setting for Parental Control and makes block permanent.
087	REAR RGB EN.	0 ~ 2	1	Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
088	EN NOISE MUTE	0 / 1	1	If set to 1, mutes audio if no signal is present.
091	YPrPb2 EN.	0 / 1	1	Set to 1 to enable Component 2 input jacks.
092	RGB2 ENABLE	0 ~ 2	2	Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
093	RJP AVAILABLE	0 / 1	0	Set to 1 to enable.
094	SAP MENU EN	0 / 1	1	Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096	DEF. ASP. RATIO	0, 1, 2, 4, 5	2	Sets default aspect ratio at power up. See detailed descriptions and item 106.
102	ATSC BAND	0 ~ 4	4	Selects ATSC band.
103	ATSC TUNE MODE	0 / 1	1	Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels.
104	START MINOR CH	0 ~ 255	0	Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
105	VID OUT FORMAT	0 ~ 2	1	0=1080i, 1=720p, 2=480p
106	ASP RATIO LOCK	0 / 1	0	To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
107	BANNER SELECT	N/A	N/A	Not applicable.
108	PANEL COM	0 ~ 3	2	0=1200, 1=2400, 2=9600, 3=115200
110	PANEL DELAY	0 ~ 15	8	Sets panel delay time.
111	PANEL VOL PRE	0 ~ 100	20	Panel preset volume to achieve the same volume levels as other systems.
112	PANEL STRT VOL	0 ~ 100	20	Panel start volume when on Aux. input.
113	PANEL TYPE	0 ~ 4	2	Selects panel type.
114	PANEL MIN VOL	0 ~ 100	0	Sets panel minimum volume level.
115	PANEL MAX VOL	0 ~ 100	100	Sets panel maximum volume level.
116	VIDEO MUTE EN	0 / 1	0	Set to 0 for normal, set to 1 for Blank.
117	FACT DEFAULT	0 / 1	0	0=Normal. 1=Loads factory default presets of all above settings.

P A G E 5 4