Zenith HCS5610 Cloning Connections / Teaching Setup, Teach Master TV/STB’s Setup to the target

Cloning Connections / Teaching Setup

Teaching the Master Setup to Another TV/STB

Connections for the LT2002 to Teach another TV/STB the Master Setup

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION	XX
THE TV IS VERSION	XX
THE SW IS REVISION	XX
CLONE CLOCK=	XX:XX
TV CLOCK=	XX:XX

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

3.5mm Stereo Plug

with IR Receiver

QuickSet II Programmer

LT2002

Ferrite Core (TDK, ZCAT 2035-0930)

				.	.	.	.
			.			.	. .
	.	.		.	.	.
.	.	.	.
. .	.	.

DVI

AC OUT 8A AC IN 120V~60Hz

		AUDIO IN		AUDIO OUT		SERVICE
REMOTE
IN
RJP
INTERFACE	1		2		DIGITAL AUDIO
AUX		DIGITAL		DIGITAL		DISPLAY
CONTROL		VIDEO IN		VIDEO OUT	OUT (OPTICAL)	CONTROL

Antenna

Wall Jack

RF Coaxial Wire

(75ohm)

Teach Master TV/STB’s Setup to the target

TV/STB

After learning is complete, remove the M.P.I. cable from the master TV/STB and connect it to the target TV/STB that you want to copy the master TV/STB’s setup into. With “THE CLONE HAS CONTROL OF TV” message displayed, press 2 to go to the “TEACH TO TV” option, press ON/OFF, POWER, or ENTER.

Select the LT2002 memory that the new setup is in. Press On/Off to transfer the new setup and other information to the new TV/STB. Teaching usually takes 2-3 minutes.

After the “TEACHING COMPLETE” message is displayed, press any key to return to the Clone menu, then press ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable from the target, newly cloned TV/STB.

Disconnect TV/STB Power for 15 Seconds

Unplug the AC power cord of the newly cloned TV/STB from the power outlet for about 15 seconds to activate the newly-copied setup.

AC Power

Cord

CLONE SELECTION MENU

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER

This menu should appear after any key is pressed on the Installer remote.

TEACHING IN PROGRESS,

PLEASE WAIT

This display will appear during Teaching function.

TEACHING COMPLETE

This display will appear after Teaching is complete.

P A G E 5 2