Rosen Entertainment Systems A10 owner manual Changing and Adjusting the Display

Rosen A10 Owner’s Manual

CHANGING AND ADJUSTING THE DISPLAY	Note: The internal DVD player can be configured for either a
Selecting a display mode: The system’s “widescreen” display has	16:9 “Wide” image output or a 4:3 standard image output.
	Since the A10 has a widescreen display, the DVD player
a 16:9 aspect ratio - wider than a standard television. While many
	should be configured for “Wide”. See page 20 for more
DVD’s provide widescreen video images that fit the screen, standard
	information.
broadcast TV and many video games don’t.
• To view widescreen DVD’s, press the DISPLAY MODE button	USING THE BUILT-IN DOME LIGHTS
until “WIDE” is displayed on the screen.
• To watch “fullscreen” DVD’s, the internal game system, or	The A10 system has built-in dome lights. In many vehicles, these built-
broadcast television, select “STANDARD”.	in dome lights replace an original factory dome light which was
	displaced when the system was installed. The dome lights are
Display adjustments: The display has adjustable video settings. To	controlled by both the Dome Light button on the front panel and by the
	matching Dome Light button on the remote control.
change these settings, press the ENTER button on the overhead
console and hold it for two seconds. The following menu appears:	When the lights are off, press either button to turn them on.

COLOR 8

BRIGHT 8

TINT 8

SHARPNESS 4

CONTRAST 8

RESET

To select a setting to be changed: Press the DOWN button to move the cursor down the menu list. After you reach the final setting, pressing DOWN will cause you to exit the menu. Selecting RESET will restore the original factory values for all five settings.

To change the value of a setting: Use the LEFT and RIGHT arrow buttons. The range is from 0 to 15.

Press DOWN to return to the display adjustments menu.

To exit the menu: Press the DOWN button to save settings and exit.

Note: See Page 12 for more on adjusting the Bright setting.

When the lights are on, press either button to turn them off.

When the lights have been turned on manually using the Dome Light button, they will automatically turn off after all the doors are closed.

		Dome Light
OPEN	ENTER	button

SOURCE

Note: Some vehicles have a dome light dimming feature that causes the light to fade out gradually after the doors are closed. The A10’s dome light may not fade at the exact speed that the factory dome lights fade, but it will turn on and off normally when the doors are opened and closed.

10