Rosen Entertainment Systems
DVD TYPICAL SETUP AND CONFIGURATION
The following section explains how to customize various features of the Internal DVD Player, including various language, display, and parental control features.
Note: Many DVD menu settings do not apply to this system, such as the Dynamic setting, since it is specifically engi- neered for automotive use. Changing the state of some
Changing the Aspect Ratio Mode
This is under the GENERAL tab. The correct setting is WIDE. Changing this setting to NORMAL/PS or NORMAL/LB will result in distorted video.
- - GENERAL PAGE - -
TV DISPLAY | NORMAL/PS |
OP MODE | NORMAL/LB |
ANGLE MARK | WIDE |
OSD LANG |
CAPTIONS |
SCR SAVER
MAIN PAGE
settings can cause apparent system failure. If you have
Changing the Video Output Mode
questions about the original state of any DVD setting, please see the list on page 25.
To change the settings for the internal DVD Player:
1 | Press SOURCE SETUP. |
2 | Use the navigation arrow buttons to highlight a selection. |
To change the video output mode, select GENERAL, and then select TV TYPE. The default is NTSC. If you want to be able to play PAL discs on your NTSC monitors, select PAL. If you change this setting and the picture “rolls”, see your Rosen dealer.
- - PREFERENCES PAGE - -
TV TYPE | MULTI |
SUBTITLE | NTSC |
AUDIO | PAL |
|
SUBTITLE
DISC MENU |
LOCALE |
PARENTAL
3 Press the ENTER button to confirm your selection. |
SETUP MENU
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
Note: The setting “MULTI” will automatically output NTSC video from NTSC discs, and PAL video from PAL discs. NTSC is the North American standard. Some discs do not play properly when MULTI is selected.
EXIT SETUP
If you try to perform an action that is not permitted (such as accessing the Preferences menu while a disc is playing), this
Note: To access the Preferences page, you must completely stop playback of any loaded disc, or eject the disc completely.
The Digital Output Setting
There is a setting in the menu for a Digital Audio output. This unit does not have a digital audio output. Leave this setting in the ANALOG mode.
Note: Enabling the Digital Audio mode disables the analog audio output used by the FM Modulator and the IR headphones, and can resemble a system audio failure.
AUDIO OUT | ANALOG |
OP MODE | SPDIF/RAW |
DUAL MONO | SPDIF/PCM |
DYNAMIC |
PRO LOGIC |
LPCM OUT
MAIN PAGE
23
