Rosen Entertainment Systems M10 ,

Rosen M10 Owner’s Manual

Congratulations on owning a Rosen M10 WIdescreen Monitor! Here’s

a partial list of some things you can do with your M10:

· Display high-quality video images from DVD players, video game

systems, and other video sources with composite video output.

· Transmit audio to single or dual-channel wireless headphones.

· Listen using the vehicle speakers or the wireless headphones.

· Control certain Rosen DVD players and TV Tuners with the front-

panel controls or the supplied remote control.

· Send a different video signal to an optional second screen, using

the M10’s Dual-Zone Control capability. Add an optional second

display, and two users can simultaneously play video and listen to

sound from two different source units. For instance, one user can

watch and listen to a DVD while the other plays a video game

(both the DVD and the video game system are optional).

In order to operate the system, the

vehicle ignition key switch must be

in the ACC or engine ON position.

•Use this system only if properly installed by a qualified installer.

•If the M10 shows any sign of overheating or malfunction, close

the display and consult your dealer immediately. Do not open the

unit - there are no serviceable parts inside.

•Do not press on the display surface - you might damage it.

•Clean the LCD panel with a slightly damp, soft cloth using

household glass cleaner. Do not use solvents such as benzene,

thinner, or commercially available cleaners.

•When using portable radios and telephones near the system,

picture or sound interference may occur.

•If your car was parked in a very cold or very hot place, you may

see a temperature warning on the screen instead of a picture.

The picture will return after the system temperature returns to

normal.

Note:

The system’s operating voltage range is 11-16VDC operat-

ing voltage. The system operating temperature is 32o to 140o

F ( 0o to 60o C). Use of the system beyond the safe operating

ranges listed can cause temporary or permanent damage to

the unit, and such damage may not be covered by the

manufacturer’s warranty.

ACC or engine

ON position