Rosen Entertainment Systems M10 Listening Over the CAR Speakers, Watching Broadcast Television

Rosen Entertainment Systems

LISTENING OVER THE CAR SPEAKERS

The M10 uses an FM Modulator (FMM) to send audio through the vehicle radio and speakers. To listen over your speakers:

1Make sure system MUTE is off. Press SPEAKER. “SPEAKER SOUND ON FM _ _ . _” appears. (If “SPEAKER SOUND DIS- ABLED” appears, select an FM frequency as described below.)

2Turn on the car radio. Tune to the FM frequency displayed on the screen, such as “FM 87.7”.

3If no system audio is heard, try changing the FMM frequency and re-tuning the radio to the new frequency.

To change the FM Modulator frequency:

Press SPEAKER. “Speaker Sound on FM _ _ . _” will be displayed.

Now use the Left and Right buttons to change the frequency. The FMM frequencies are 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9, 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, and 107.9. After you select a frequency, re-tune your radio and check for clear sound.

The system saves the frequency you select, and returns to it each time the system is turned on. You may want to store the FM Modulator frequency as a preset of your radio for ease of use.

Note: If there seems to be a strong station on the FM Modulator frequency, and you are hearing a radio station mixed in with the system audio, change the FM Modulator frequency. Avoid frequencies used by local radio stations.

If the words “SPEAKER SOUND DISABLED appear, the Internal FMM is turned off. It can be turned on by pressing the left or right arrow keys and selecting an FM frequency. If the words “HEADPHONE SOUND ONLY” appear, an external FM Modulator is probably being used. In this case, the SPEAKER button turns the external FMM on and off. The Rosen external FMM is uses either FM 87.9 or FM 88.3. If you have any questions about your FMM, please ask your Rosen dealer.

WATCHING BROADCAST TELEVISION

(ON TV TUNER-EQUIPPED SYSTEMS)

You can watch television on the system if you have installed the optional CV4000 TV Tuner kit (includes TV Tuner, antenna, and an AC3024 harness).

Note: Broadcast television reception varies with location, terrain, distance from the broadcast tower, and other factors. Signal quality is likely to vary in a moving vehicle.

1Press SOURCE to select the “TV TUNER” input. “TV TUNER” will appear on the screen. If the screen remains dark, press the remote’s POWER button.

2Press the UP CH and DOWN CH arrow buttons on the remote to change channels. You can also use the UP and DOWN arrows on the front control panel. Pressing the LEFT and RIGHT buttons allows you to access the auxiliary inputs of the TV Tuner.

3To scan and store all available channels, press SOURCE MENU.

Note: To watch broadcast television or videotapes in their original format, press the DISPLAY MODE button on the remote control until “STANDARD” is displayed on the screen. This will properly size the image, instead of stretching the image across the wide screen. In “STANDARD” mode, you will see black bars on the sides of the image, like this:

15