Rosewill RC200 user manual This will let PC boot from a HD controller instead of motherboard HD

ULTRA ATA/133 PCI RAID Card RC200 User Manual

HD connecting to RC-200 instead of motherboard. Please follow below steps a~f to complete the installation.

a. Put the driver (the driver must fit the OS you want to install to the HD) into a floppy disk and keep it in the floppy drive.

b. Plug the HD. Turn on PC and press F3 to complete the RAID set. After you complete, save and left the setting.

c. Inset Windows installation disk and start the windows installation. d. Press F6 at the beginning as the blue screen scanning.

This will let PC boot from a HD controller instead of motherboard HD.

e. Keep the floppy in floppy drive and follow the installation. Press “S” when the screen

15