ULTRA ATA/133 PCI RAID Card RC200 | User Manual | |
|
|
|
for setting mirror.
c. Turn on PC and enter RAID BIOS to set mirror. Choose “Manual” and then select the original HD as the data source to complete mirror. The copy will take a long time depending on your HD capability. After data copy complete, save and left RAID BIOS.
Important message: If you choose the wrong HD source at the step of
“manual”, all your data will be lost.
d. Reboot your PC and now you can enter your OS with RAID 1. (Please change the booting sequence in CMOS if necessary)
Detail guide:
For Windows® 98 SE
＊For New Windows® 98SE Installation
Setup the RAID Array prior to Windows installation.
1.Install the board and follow Microsoft procedures to install Windows® 98 SE accordingly.
2.Once Windows has been installed, right click My Computer and click Properties. Select Device Manager tab.
3.Double click PCI RAID Controller listed under Other Devices.
4.Select Driver tab, then click Update Driver button.
5.Insert the driver CD into the
6.Select Search for the best driver for your device(Recommended) from the following dialog box and type
21
