SATA+ULTRA ATA RAID CONTROLLERRC212 | User Manual | |
|
|
|
14.And then a Create New Raid Success!! Message will be displayed. Press ESC to quit then go back to the RAID utility main menu.
15.Press ESC to exit the BIOS.
16.When asked Do you really want to exit the utility? (Y/N), press Y to accept.
SPAN (JBOD)
1.As the BIOS boots press Tab when prompted to enter the RAID BIOS.
2.At the RAID utility main menu select Create Array, press Enter.
3.At the next screen select Auto Setup For Capacity, press Enter.
4.When asked Auto Create array will destroy all data on disks. Continue? (Y/N), press Y to accept.
5.And then a Create New Raid Success!! Message will be displayed. Press ESC to quit then go back to the RAID utility main menu.
6.Press ESC to exit the BIOS.
7.When asked Do you really want to exit the utility? (Y/N), press Y to accept.
Delete RAID Disk Drive
1.As the BIOS boots press Tab when prompted to enter the RAID BIOS.
2.At the RAID utility main menu select Delete Array, press Enter
3.Please use arrow keys ↑and ↓ to select the RAID set then press Enter.
4.When asked The selected array will be destoried. Are you sure? Continue? Press Y/N, press Y to confirm.
BIOS Configuration
The PCI SATA+PATA RAID card’s BIOS will appear every time your system starts up.
12
