English |
|
7 |
The
The
A Few Precautions
Please read this manual carefully. It provides complete information on how to incorporate the
Save the
Fill out and send in the owner’s registration card packed with the
Placement
Like all audio components that handle
Cables
Be sure to keep the power cords, digital signal cables and regular audio signal cables in your installation away from each other. This will minimize the chance of the regular audio signal cables picking up noise or interference from the power cords or digital cables. Using only high quality, shielded cables will also help to prevent noise or interference from degrading the sound quality of your system. If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system.
Remote Control
The
Remote Sensor 2
The remote sensor receives infrared signals from the remote control. Do not cover or block the sensor. It must be unobstructed or the remote control will not work properly.
The operation of the remote sensor can also be affected if it is exposed to bright sunlight or certain types of lighting (such as halogen lights) that emit infrared light. In addition remote control functions may not work reliably if the batteries in the
Note: To use the remote, aim it at the remote sensor on the front panel of the
Remote Control Batteries
Two
AC Power and Control
AC Power Input u
Note: Be sure to set the Volume control to the minimum (full counterclockwise) position before connecting the power cord.
Connect the supplied power cord to the AC Input receptacle on the rear panel. Do not connect the power cord to the power outlet until all the audio input and output connections have been made.
It is usually best to plug the RC‑1550 directly into a
Your
Note: Should you move your
If you are going to be away from home for an extended period of time such as a