| |
10 |
Recording Selector Control 7
Front panel only
Turn the front panel control 7to select the input signal that goes to the record outputs. When you are not recording, set the control to Off. This minimizes the chance of interference from other components in the system.
Having a separate Recording and Listening selector adds a significant degree of flexibility in how you can use the
If you have a
Note: If you select TAPE 1 with the RECORDING control 7, the recording signal will only be available at the TAPE 2 recording outputs. To copy a tape from one tape recorder to another, connect the source recorder to the TAPE 1 inputs and outputs and set the RECORDING control to Tape 1. Connect tape recorder you are copying to to the Tape 2 inputs and outputs.
Controlling Other Components
In addition to operating many of the controls of the
CD Functions DG
The / PLAY, . STOP, , PAUSE, { } TRACK and, RANDOM buttons, and NUMERIC buttons (0 - +10) operate many Rotel CD players after the CD button on the remote has been pressed.
DVD Functions DG
The / PLAY, . STOP, , PAUSE, { } TRACK and RANDOM buttons operate Rotel DVD players, after the AUX1 button on the remote has been pressed.
Tuner Functions F
The BAND, TUNING < >, and additional tuning feature buttons (PTY, TA, TP, etc.) operate Rotel tuners, after the TUNER listening button on the remote has been pressed.
Note: By default, the
To program for the
To program for the
Troubleshooting
Most difficulties in audio systems are the result of incorrect connections, or improper control settings. If you encounter problems, isolate the area of the difficulty, check the control settings, determine the cause of the fault and make the necessary changes. If you are unable to get sound from the
Standby Power Indicator Is Not Lit
The Standby Power Indicator should be lit whenever the
Fuse Replacement
If another electrical device works when plugged into the power outlet, and the Standby Indicator still will not light when the
No Sound
Check the signal source to see if it is functioning properly. Make sure the cables from the signal source to the
Remote Control Code Conflicts
Rotel uses the same IR remote control codes for all its audio products. In systems that have multiple Rotel products, the IR control codes of a remote control that is supplied with one product may interfer with the control codes of another product. The
To change the IR codes of the
Note: After changing the remote codes for the remote control and the preamplifier as described above, the remote control will no longer operate the Rotel tuners. To return the
Resetting the IR codes
Should you need to reset the IR code, press the MUTE button A on the