| 2 |
|
This Class B digital apparatus complies with Canadian
Cet appareil numŽrique de la classe B est conforme ˆ la norme
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct expo- sure to beam.
3.CAUTION: Do not open the top cover. There are no user serviceable parts inside the player; leave all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1.Do not remove screws, covers or cabinet.
2.Do not expose the unit to rain or moisture.
3.Do not touch the power cord or plug with wet hands.
Important Safety
Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to quali- fied service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immedi- ately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary re- pairs.
Read all the instructions before connecting or op- erating the component. Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must be ventila- tion of the cabinet to allow proper cooling.
Keep the component away from radiators, heat reg- isters, stoves, or any other appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage specified on the rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarization provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left unused for a long pe- riod of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if:
¥The power supply cord or plug has been dam- aged.
¥Objects have fallen or liquid has been spilled into the unit.
¥The unit has been exposed to rain.
¥The unit shows signs of improper operation
¥The unit has been dropped or damaged in any way
Place the unit on a fixed, level sur- face strong enough to support its weight. Do not place it on a move- able cart that could tip over.
Notice
The COMPUTER I/O connection should be handled by authorized person only.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ra- dio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
¥Reorient or relocate the receiving antenna.(TV, radio, etc.)
¥Increase the separation between the equipment and receiver
¥Connect the equipment to an outlet on circuit different from that to which the receiver is con- nected.
¥Consult the dealer or an experienced radio/TV technician for additional help.
Caution
This device complies with part 15 of the FCC Rules operation is subject to the following to conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
