Rotel RCC-1055 owner manual Random Play Button, Program Button, Track Programming

11 English

Random Play Button

(remote only)

The Random Play feature randomly selects tracks to be played. Press the Random but- ton to turn the feature on. Press it again to turn Random Play off. When the Random Play is active the Random Indicator in the display is illuminated.

If Random Play is turned on when a disc is not playing, a track is randomly selected when the play button is pushed. If a disc is playing when Random Play is turned on, another track is randomly selected immediately and begins playing.

The Random Play feature can be set to select only tracks from a single disc. While a disc is not playing, press the Random Play button , then select the number of the disc to select tracks from with the disc select buttons . When you press the play button tracks are randomly selected from the selected disc.

If the Track Skip Forward button is pressed when a disc is playing and Random Play is turned on, another track is immediately ran- domly selected. If the Track Skip Back button is pressed when a disc is playing and Random Play is turned on, the same track begins playing from the beginning.

The Search Forward button functions nor- mally when Random Play is turned on. If you search forward to the end of a track another track is randomly selected. The Search Reverse

button will allow you to search back to the beginning of the track that is playing.

Random Play can be used in conjunction with Programmed Play. If Random Play is turned on after a set of tracks has been programmed, the programmed tracks are played in random order.

NOTE: In order to use these two together the Random Play must be turned on after tracks have been programmed. If Random Play is turned on the Programmed Play fea- ture cannot be selected.

If the Repeat 1 Track or Repeat 1 Disc feature is on, it is deactivated when Random Play is turned on. The Random Play and Repeat All Discs features may be used together.

Intro Scan Button

(remote only)

The Intro Scan feature lets you listen to a short section of the beginning of musical tracks. Press the Scan button to turn on the Intro Scan fea- ture. Press the Scan button again, or the Stop button, to turn Intro Scan off. When the Intro Scan feature is active the Intro indicator in the display is lit.

If Programmed Play is not being used, the first 10 seconds of each track on each loaded disc is played in sequence, beginning with the currently selected track. After the first 10 sec- onds of the last track on disc 5 is played, Intro Scan playing stops. If Programmed Play is being used, the first 10 seconds of each pro- grammed track is played, beginning with the currently selected programmed track. After the first 10 seconds of the last programmed track is played, Intro Scan playing stops.

If Intro Scan is turned on when a disc is not playing, scanning begins with the track that is selected. If a disc is playing when Intro Scan is turned on, the RCC-1055 skips to the next track, plays the first 10 seconds of that track, and each of the following tracks. There is one exception - if Intro Scan is turned while the first 10 seconds of a track is playing. In that instance the remainder of the first 10 seconds of that track is played. The RCC-1055 then skips to the beginning of the next track and continues scanning.

The Intro Scan feature is interactive with Ran- dom Play, Programmed Play and Repeat Play. Such combined functions will rarely be used. For example, if both Intro Scan and Repeat Play/All are turned on, the first ten seconds of each disc is played continually in sequence. If both Intro Scan and Random Play are turned on, the first ten seconds of randomly selected tracks are played. If Intro Scan and Pro- grammed Play are active, the first ten seconds of each programmed track are played in se- quence. If Repeat Playing/All is also active the first ten seconds of each programmed track are played in sequence continually. Other com- binations of functions are possible, but again are unlikely to be used.

Programmed Disc Play

Up to 32 tracks, on any of the loaded discs, can be in selected for playback. After a group of tracks have been programmed, they are played back in the programmed order. All programming and programmed play functions are done with the remote control.

Program Button

(remote only)

The Program Button is used to turn the Pro- grammed Play feature on and off. When Pro- grammed Play is turned on the Program Play

Indicator in the display is lit.

Once a group of tracks have been pro- grammed, only those tracks may be played until the Programmed Play feature is turned off. Press the Program Button to turn off Pro- grammed Play, clear the programmed tracks and return to normal play mode. Programmed tracks are also cleared when the Disc Tray is opened and when the power is turned off.

Track Programming

Programming While a Disc is Playing

Press the Program Play button , the Pro-

gram Indicator in the display lights. The track that is playing when the Program But- ton is pressed becomes the first programmed selection. The Time display briefly displays ÒP-01Ó indicating the track is now programmed selection 1. If the second track you want to add to the program list is on the same disc,

use the Track Selection buttons to select the next track. If the second track you want to add to the program list is on a different disc, use the Disc Selection buttons to select the next disc. The Track and Time displays change to indicate another selection is being made. The Time display briefly displays ÒP-02Ó indicating the track is now programmed se- lection 2. Continue selecting new discs (if nec- essary) and tracks until you have programmed all the tracks you want. Then press the Play button to begin playing the programmed tracks.