7

English

AC Power and Control

AC Power Input

Your RCC-1055 is configured at the factory for the proper AC voltage in the country where you purchased it (either 115 volts or 230/240 volts. The AC line configuration is noted on a decal on the back panel.

NOTE: Should you move your CD player to another country, it may be possible to re- configure it for use on a different line volt- age. Do not attempt to perform this conversion yourself. Opening the enclosure of the RCC-1055 exposes you to danger- ous voltages. Consult a qualified service person or the Rotel factory service depart- ment for information.

The RCC-1055 should be plugged directly into

a2-pin polarized wall outlet or into the switched outlet on another component in your audio system. Do not use an extension cord.

Be sure the power switch on the front panel of the RCC-1055 is turned off (in the "out" position). Then plug the power cord into an AC power outlet.

If you are going to be away from home for an extended period of time such as a month- long vacation, it is a sensible precaution to unplug your CD player (as well as other au- dio and video components) while you are away.

Power Switch and Power Indicator

The Power Switch is located on the left side of the front panel. Push the switch button in to turn on the RCC-1055. To turn the RCC-1055 off, push the button again to return it to the "out" position.

NOTE: If you are using a switched outlet to turn on and off your CD player, you should leave the power switch in the "on" position. When AC power is applied to the unit, it will power up in fully active mode.

When the Power Switch is turned on the disc in position 1 in the tray is selected. The Disc and Track Displays illuminate and show Disc 1/ Track 1. The Time Indicator also illuminates.

Output Connections

The RCC-1055 gives you a choice of analog or digital output signals. The analog output signal from the built-in Digital to Analog con- verter is used with conventional analog au- dio components. The digital output, which pro- vides an unprocessed digital data signal, is used with outboard D/A converters or digi- tal processors.

NOTE: To prevent loud noises that neither you nor your speakers will appreciate, make sure all the system components are turned off when you make any signal con- nections.

Analog Outputs

[See Figure 4 for wiring illustration]

A pair of standard RCA jacks supplies a con- ventional unbalanced analog output signal from the RCC-1055 to the source inputs of an audio preamplifier, integrated amplifier, or receiver. RCA connections are found on vir- tually all components. Select high quality au- dio interconnect cables. Connect the left chan- nel output of the RCC-1055 to the left chan- nel source input on the preamplifier or other component. Connect the right output of the RCC-1055 to the right channel source input on the preamplifier or other component.

Digital Output

[See Figure 5 for connection illustra- tion]

If you are using the RCC-1055 as a disc trans- port with an outboard D/A converter or other digital processor, you need an unprocessed digital data stream from the RCC-1055, taken before the built-in D/A converter. This signal is supplied by the back-panel coaxial digital output jack. Using a standard 75 ohm coax cable, connect the digital output jack to the digital input connector on the outboard D/A converter.

Remote Control

The RCC-1055 is supplied with an RR-D92 remote control. When using the RR-D92 the emitter on the front of the control must be pointed at the RCC-1055 front panel. The basic disc play functions are controlled by the but- ton located near the front of the RR-D92. There is a cover over the lower portion of the RR-D92 that slides down to reveal buttons that con- trol secondary functions, such as programming, disc scanning and direct disc selection.

The RR-D92 duplicates the basic disc play control functions of the front panel control but- tons. When a disc play control is on both the front panel and the remote control, both control identifiers are shown in the related instruction text. For example, to play a disc you can press either on the front panel or on the re- mote control. There are some functions, such as programmed track play functions, that are operated exclusively by the RR-D92.

Remote Sensor

The Remote Sensor picks up the infrared sig- nals from the remote control. Do not cover or block the sensor. It must be unobstructed or the remote control will not work properly. The operation of the Remote Sensor can also be affected if it is exposed to bright light, par- ticularly sunlight. Certain types of lighting, such as halogen lights, that emit a fair amount of infrared light, can also interfere with proper operation. In addition remote control functions may not work reliably if the batteries in the RR-D92 are weak.

External Remote Input

This connector is designed to be used in con- junction with Xantechª brand Video Linkª IR signal pick ups (sold separately by custom system installers). This feature enables you to operate the RCC-1055 with the hand held re- mote control even when it is installed where it is not visible from your listening location. Contact your authorized Rotel dealer for more information.

Video Link and Xantech are Trademarks of Xantech Corporation.

Page 6 Page 8
Page 7
Image 7
Rotel RCC-1055 owner manual Remote Control, AC Power and Control
Page 6 Page 8

RCC-1055 specifications

The Rotel RCC-1055 is an advanced 5-disc CD changer that epitomizes both performance and versatility, making it a popular choice among audiophiles and casual listeners alike. This unit is designed to deliver high-quality audio playback while providing a seamless user experience through its innovative features and technologies.

One of the standout characteristics of the RCC-1055 is its robust construction, which helps to minimize vibration and interference. The chassis is designed to reduce resonance, ensuring that audio playback remains clear and accurate. The use of high-quality components ensures reliable performance and longevity, a hallmark of Rotel's engineering philosophy.

The RCC-1055 supports a wide range of disc formats, including standard CDs, CD-Rs, and CD-RWs, allowing users to enjoy their entire music collection without limitation. The easy-to-navigate tray accommodates five discs, thus eliminating the need for constant swapping, making it ideal for long listening sessions or parties.

In terms of audio performance, the RCC-1055 features advanced digital-to-analog conversion, which is essential for translating digital audio signals into a rich and immersive listening experience. The unit employs high-resolution DACs, ensuring that even the most subtle nuances of your music are preserved. The low-jitter design further enhances sound quality, providing a clean and detailed output that appeals to discerning listeners.

User convenience is a priority with the RCC-1055, as evidenced by features such as a remote control and programmable playback options. The user-friendly interface allows for easy access to disc selections, track programming, and shuffle options, ensuring that all listeners can tailor their audio experience to suit their preferences.

In addition, the RCC-1055 is compatible with various audio systems, offering multiple outputs, including optical and coaxial digital outputs, as well as standard RCA connections. This flexibility enables seamless integration into existing home theater or stereo setups.

Overall, the Rotel RCC-1055 combines quality construction with advanced audio technology, making it an exceptional choice for anyone looking to enhance their music listening experience. Its blend of performance, usability, and versatility solidifies its place as a standout product in the world of high-fidelity audio equipment. Whether you are an audiophile or a casual listener, the RCC-1055 promises a compelling and enjoyable audio journey.
Top Page Image Contents