Rotel RSDX-02e Basic Operations, Programming the RR-1070 MENU Button, Changing Pages PAGE Buttons

NOTE: Some of the RSDX-02e functions ap- pear on the front panel and the remote. Throughout this manual, letters in gray boxes refers to the labeled illustration of the remote at the front of this manual; numbers in gray boxes refer to the front panel illustration.

The remote control includes five hard buttons POWER, CHANNEL UP/DOWN, and VOL- UME UP/DOWN. The other remote control commands are used by touching “virtual” buttons appearing on the large touch screen panel on the remote.

Programming the RR-1070 MENU Button

See Figure 2

Before using the the RR-1070, you may need to program it to operate the RSDX-02e. De- tailed programming instructions are contained in the separate remote control owner’s manual. Or, follow these simple instructions:

1.Touch the MENU command at the bottom left of the touch-screen on the remote.

2.Touch the SETUP command on the touch screen.

3.Touch the BRAND NAME command on the touch screen.

4.Touch the ROTEL command on the screen.

5.Select and touch the RSDX-02 EURO com- mand on the touch screen and wait a few seconds.

6.Touch the OK command on the touch screen and wait afew seconds.

7.Touch the HOME command at the bottom center of the touch screen.

Using the RR-1070

ROTEL Button

See Figure 2

To use the RR-1070 remote with the RSDX-02e, press the ROTEL virtual button on the home page of the remote control. The touch screen display will change to the first of six pages of commands for the RSDX-02e. Each page is identified by the name ROTEL at the top.

If you do not see one of the Rotel touch screen pages, press the HOME virtual button on any page to return to the home page where you can press the ROTEL button.

19

NOTE: Some remote buttons have different functions for depending on the source input. Select the proper input (i.e. DVD or FM/AM) before using the command buttons.

Changing Pages

PAGE Buttons

See Figure 2

There are six pages of touch screen commands for the Rotel RSDX-02e. From any of these pages, press the up or down PAGE buttons at the bottom of the touch screen to move forward or back to the next page. Each page number is displayed between the two PAGE buttons, for example: PAGE 1/6 indicating the first of six available pages.

Throughout this manual, remote control com- mands that are available on any of these pages or on the remote’s hard buttons are indicated with a single letter in a gray box, referring to the remote illustration (Figure 2) at the front of this manual. Commands which appear only on of the six Rotel pages will be indicated with the page number followed by a letter, for

example: indicating a command on Page

3.Again these indicators appear on the re- mote illustration for easy reference.

POWER Button

The POWER hard button on the remote pro- vides the same function as the STANDBY but- ton on the front panel. Press the button once to activate the unit; press again to put the unit into standby mode.

VOLUME Buttons

Two hard buttons on the remote (VOL + and VOL –) control the master VOLUME, adjust- ing the output level of all channels.

CHANNEL Buttons

Two hard buttons on the remote control, la- beled CH + and CH –, are used when oper- ating the RSDX-02’s DVD player or AM/FM Tuner. In DVD mode, these buttons are used to select the next Track, backward or forward. In AM/FM mode, the buttons tune up or down.

HOME Button

The HOME virtual button appears at the bot- tom of the touch-screen on every ROTEL or other device page. Press HOME to return to the main touch-screen page.

English

MUTE Button

The MUTE virtual button also appears at the bottom of the touch-screen on every ROTEL page. Press the MUTE command to temporarily reduce the volume level to zero. Press the button again to restore the volume to the previous setting.

Basic Operations

This section covers the basic operating con- trols of the RSDX-02e and the remote.

Power On/Off

The RSDX-02e has a STANDBY button on the front panel and a POWER hard button on the remote. Press either button to turn the unit on. The front panel LCD display lights up.

Press either button again to turn the unit off. When turned off, the RSDX-02e remains in a low current standby mode. The LED above the STANDBY button the front panel lights when the unit is in standby mode.

NOTE: To completely power off the RSDX-02e when away from home for a long period of time, unplug the unit from the AC wall outlet.

The RSDX-02e also has a sleep function which turns the unit off after a specified amount of time (see the following topic). There is also an auto standby function that can automatically turn the unit off (only when using the DVD player) 30 or 60 minutes after the disc is stopped.

SLEEP Timer P4-F

The RSDX-02e sleep function turns the unit off automatically after a specified amount of time. Press the SLEEP command on page 4 of the remote to activate the sleep function. Each ad- ditional press of the button increases the length of time before the unit turns off.

1st press: 10 minutes

2nd press: 20 minutes

3rd press: 30 minutes

4th press: 60 minutes

5th press: 90 minutes

6th press: 120 minutes

7th press: 150 minutes

8th press: 0 minutes (sleep timer cancelled)

A SLEEP indicator and with the amount of time is shown in the front panel display. The time remaining before the sleep timer turns the unit off can be displayed with a single button press.