RTS DKP-8 manual Top Level Menu, Display, Listen, Top Level Menu, Display, Page Use

Using the Top-Level Menu

Top Level Menu, Display, Listen

When you tap LISTEN, the listen key assignment for each key will appear in the alphanumeric display above the key. If there is no listen assignment, the display will show (- - - -).

The call waiting window will also display TAP KEYS. If the keypanel does not have alphanumeric displays for intercom key assignments, tap any key and the assignment will appear in the call waiting window. (If the key is not assigned, the call waiting window will display dashes.)

Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for about two seconds to clear the call waiting window, if desired.

Top Level Menu, Display, Page Use

PAGE USE shows which setup page is assigned to the keypanel. For KP-12’s it also shows which pages are assigned to any connected expansion panels. When you select PAGE USE, PG 1 will display in the left side of the call waiting window and the panel to which page 1 is assigned will appear in the right. Turn the SELECT control to view the page 1-4 assignments.

KP-12 indicates a keypanel; EXP1, EXP2, etc. indicate expansion panels. For example, PG1 KP-12 means setup page 1 is assigned to the keypanel; PG EXP1 means setup page 2 is currently assigned to expansion panel #1. If a page is not assigned, the call waiting window will display NONE.

Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two second to clear the call waiting window, if desired.

Top Level Menu, Display, Port Num

When you select PORT NUM, the port number to which the keypanel is connected will display in the call waiting window.

NOTE: You will get a false reading if the keypanel address has not been correctly set using “Menus, SERVICE, SET ADDR” on page 44.

Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two seconds to clear the call waiting window.

Top Level Menu, Display, SOLO

A SOLO key is a talk key that, when activated, will cause all other active intercom keys to turn off. Turning the solo key off will cause the deactivated keys to turn back on. When you select SOLO in the DISPLAY menu, all keys that are currently assigned to operate as solo keys will light. The talk and listen indicators will light according to the way the keys have been programmed. For example, if a solo key normally activates as both talk and listen, both the talk and listen indicators will be green.

Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two seconds to clear the call waiting window, if desired.

For description and assignment of solo keys, see “Menus, KEY OPT, SOLO” on page 37.

Top Level Menu, Display, Version

Select VERSIONS to display the keypanel’s software version in the call waiting window.

NOTE: The KP-12 version can easily be updated from AZedit. See firmware download in AZedit help or User Manual.

18