RTS DKP-8 Using the Top-Level Menu, General Description, Top Level Menu, - - Clear call waiting

CHAPTER 5

Using the Top-Level Menu

General Description

When the keypanel is turned ON, it resets to the top-level menu. At this level, the MENU indicator is OFF. To access the items in the top level menu, turn the SELECT control. The following items are displayed in the call waiting window as the SELECT control is turned:

ITEM	DESCRIPTION
- - - -	Clear call waiting. Default condition od display. May be used to clear keys.
Call list names	The last 4 destination names to appear in the call waiting window are retained for quick talk using the
	SELECT control.
DISPLAY	Displays information such as the keypanel’s port number, setup page usage, listen assignments, etc.
KEY LIST	Accesses all four setup pages of key assignments for this keypanel.
LEVEL	Lets you adjust the range of VOLUME control or adjust the listen level for selected intercom keys.
LISTS	Accesses the intercom system scroll lists for key assignment.
MENUS	Provides access to less commonly used keypanel features.
PAGE (1-4)	Lets you assign a different page of key assignments
TGL LISN	Lets you activate/deactivate the listen assignment for a talk key without activating the talk assignment. (Push-
	button only)

Tap the SELECT control on any item in the top level menu to select that item.

The following paragraphs describe the use of the top-level menu items.

Top Level Menu, - - - - (Clear call waiting)

The call waiting window defaults to clear (- - - -) at power-up and when no action has been taken with the SELECT control for about 30 seconds. The clear indication may be used to clear an intercom key’s assignment. To do this, press and hold the SELECT control, then tap the intercom key that you want to clear.

•Clear call waiting only clears key assignments. It does not clear key options. If you want to clear an option that has been assigned to a key, use “Menus, KEY OPT, CLR OPT” on page 36.

•If a key assignment will not clear, restrictions may have been imposed using the intercom system configuration software. In this case, talk to the intercom system administrator if you need to make changes.

15