Ruby Tech PM0426-13 Cleaning the Joystick, Cleaning the Touchscreen Monitor, Watchdog Timer

COPYRIGHT © 2005 MERIT INDUSTRIES, INC.

Cleaning the Joystick

•The joystick should be cleaned with a damp cloth and mild detergent. Always apply the cleaner to the cloth and not directly on the game. Liquids could enter the housing and damage elec- tronics inside.

Cleaning the Touchscreen Monitor

•The touchscreen glass should be cleaned with a damp cloth and isopro- pyl alcohol or a non-ammoniacleanser. Do not use any abrasive or vinegar- based cleansers, as they will damage the touchscreen glass.

NOTE: DO NOT USE ANY ABRASIVE SOLVENTS, ACID OR VINEGAR-BASED CLEANSERS ON THE MONITOR OR SIDE DECALS. OVER TIME, SUCH CLEANSERS COULD HARM THE TOUCHSCREEN AND ERASE THE DE- CALS. BE CAREFUL NOT TO USE COM- MERCIAL CLEANERS CONTAINING ANY OF THESE SUBSTANCES.

Cleaning the Fans and Vents

•The fans and vents should be cleaned of any dust and grime on a regular basis to ensure proper ventilation of the game.

•To ensure proper operation of the game, it is important that all fans are operating correctly and that the airflow is unobstructed. Make sure nothing is placed inside the cabinet or next to the fan vents that would inhibit the flow of air. Also, if any fans are not operating, it is important that they be replaced.

Watchdog Timer

This game has been equipped with a fea- ture that allows it to automatically reboot if it encounters a problem. When the watchdog timer is enabled, it will reboot the machine within 2 minutes after a failure, allowing the game to automatically reset itself if a prob- lem arises without needing a technician present.

If you want to disable the watchdog timer, set DIP switch 3 on the I/O board to the open position and reboot the game.

PM0426-13 MEGATOUCH EVO ION OWNER’S MANUAL 4