User’s Manual
4. Basic Operation
Turning on the Power
■The Power LED lights orange when power is applied and the power switch is turned on.
■Press and hold the ON key on the remote control for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then light solid green.
■" Searching…." will be displayed on the screen before the projector identifies the input signal. This message will remain on the screen until a valid signal is detected.
■If the horizontal frequency of the input signal exceeds the range of the projector (XGA), a " Not supportive timing " message will be displayed on the screen. This message will remain on screen until you change the input signal.
ON | OFF |
VIDEO | COMPONENT | |
COMPONENT HD RGB HD | PC | |
Zoom/ Focusing
■Adjust the projection image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens.
| Focus |
| Focus |
Zoom out | Zoom |
Zoom inin |
Selecting Input Source
■When this unit is turned on, it will search for the input source you selected last time.
■You may select the input source directly on the remote control.
VIDEO | COMPONENT | |
COMPONENT HD RGB HD | PC | |
4. Basic Operation 15
