User’s Manual

ENVIRONMENT Setting Page

In this Menu, the global settings for the projector can be made.

There are 5 Menu Items: DEFAULT — LAMP TIMER — BACK LIGHT — AUTO OFF — LAMP HOURS.

1.DEFAULT: Load the default value of current input source.

2.LAMP TIMER: Resets the lamp timer. This should only be done after the lamp has been replaced.

3.BACK LIGHT: Turn on/off the Power ON Indicator.

4.AUTO OFF: Set the auto shutdown timer. The setting timer is from 10 minutes to 3 hours.

5.LAMP HOURS: This displays the number of hours the lamp has been used (the useable lifetime of the lamp is 1500 hours). If the lamp hours exceed 1500, a warning message will be displayed on screen; when this happens, contact your Runco dealer for a new lamp.

INSTALL Setting Page

This menu contains items necessary for installation.

There are 4 Menu Items included: LANGUAGE, MIRROR, KEYSTONE and SCREEN.

1.LANGUAGE: There are 3 languages that could be selected for the menus: English, French and Spanish.

2.MIRROR: The projector could be installed on a ceiling or behind a screen, or with one or more mirrors. There are four settings:

FLOOR FRONT

CEILING FRONT

FLOOR REAR

CEILING REAR

3.KEYSTONE: Corrects for trapezoidal distortion as a result of the angle of projection (-12 ~ +12). This can correct for up to ± 12 degrees of offset.

4.SCREEN: Select the right aspect ratio for your screen.

4 X 3

16 X 9

5. Menu 21

Page 25
Image 25
Runco CL-500 manual Environment Setting, Install Setting