
User’s Manual
PIP function
■Press the PIP button to enable the PIP function
■For PIP purposes, there are two groups of inputs separated by their display modes:
Video Group: Video,
Graphic Group: HDTV input and Computer input.
■The PIP can show one input from the Graphic Group within one input from the Video Group, or show one input from Video Group within one input from the Graphic Group.
■Press the PIP button to switch to the main window or turn off PIP function.
■Select the input source of main window by pressing the INPUT button.
■Press the ACTIVE button to switch to the active window. You can change the the input signal setting in active window.
■Press PIP+ or PIP- to adjust the size of PIP window.
■Adjust the position of the PIP window with the ARROW keys ( / / / ).
PIP | ACTIVE | PIP+ | PIP- |
| |||
|
|
| LIGHT |
Turning off the Power
■Press the OFF key on the remote control to turn off the unit
■After turning off the unit, the POWER LED will blink green and the fans will operate for 1 minute to cool down the lamp. The projector will not respond to any command until cooling down process is completed. The POWER LED will light solid orange once the cooling down cycle has completed.
ON | OFF |
VIDEO | COMPONENT | |
COMPONENT HD RGB HD | PC |
4. Basic Operation 17