Runco CP-42HD, CP-52HD manual Operations, Turning on the Power, Changing the OSD, Language

4. Operations

4.1

Turning on the Power

1.Turn on your source components.

2.Plug the female end of the supplied power cord into the AC receptacle inside the back input panel of the Climate Series LCD (AC 100V ~ 240 V).

3.Connect the other end to your AC power source.

4.Press the ON button ( ) on the remote control to turn on the display (or press the power button ( ) on the side of the display).

5.After a brief warm-up period (approximately 10 seconds), the Climate Series LCD will display an image.

4.2	The Climate Series LCD OSD language
Changing the OSD	is initially set to English, but can also
Language	display the menus in French or Spanish.
	To change the OSD language:
1.	Press MENU.
2.	Select Setup from the Main Menu.
3.	Select Menu Language from the Setup
	Menu.
4.	Press or to highlight the desired
	language and press O.K. The change
	takes effect immediately.

20 Runco CP-42HD/CP-52HD Owner’s Operating Manual