Runco CW-50MC manual Picture Tab, White BAL. Tab, Screen Tab

INSTALLER MENUS for VIDEO NTSC, PAL or DIGITAL 480P and HDTV

INSTALLER ADJUST Menus for Video NTSC, PAL or Digital 480p & HDTV

These menus will appear only when displayed for video.

Gaining access to the INSTALLER ADJUST Menu is done by pressing the installer adjust button below SDTV-2 button (number 4) using a small paperclip (with no menu present). Press menu at any time to exit INSTALLER ADJUST mode. The adjustments are stored automatically. (see page 12)

1.PICTURE Tab

Make initial picture adjustments for each input independently. Refer to the PICTURE description in the OSD for Video NTSC, PAL Digital 480p and HDTV or PC/HDTV-I, D-Sub Input Menus for guidance.

INSTALLER ADJUST					INPUT 3
PICTURE	WHITE BAL.	SCREEN		SET UP	OPTION
CONTRAST		: 128
BRIGHTNESS		: 128
COLOR		:	64
TINT		:	30
SHARPNESS		:	8

INSTALLER ADJUST					INPUT 3
PICTURE WHITE BAL.	SCREEN			SET UP	OPTION
C.DETAIL RED		:	30
C.DETAIL YELLOW		:	30
C.DETAIL GREEN		:	30
C.DETAIL CYAN		:	30
C.DETAIL BLUE		:	30
C.DETAIL MAGENTA		:	30
PICTURE DEFAULT

2.WHITE BAL. Tab

White balance is global for all presets and allows for configuration of R, B, G levels GAIN and OFFSET. Choose the middle color temp from the main menu and adjust in this menu for proper 6500K color temperature. The other presets in the user menu will be offset by approximately 1000K higher or lower depending if the preset is cooler or warmer.

INSTALLER ADJUST				INPUT 3
PICTURE	WHITE BAL.	SCREEN	SET UP	OPTION
R. GAIN			: 128
G. GAIN			: 128
B. GAIN			: 128
R. OFFSET			: 128
G. OFFSET			: 128
B. OFFSET
WHITE BAL. DEFAULT

3.SCREEN Tab

Adjust positioning of image horizontal and vertical position for each input if necessary. Screen Default will set back the factory settings for the current input only.

INSTALLER ADJUST					INPUT 3
PICTURE	WHITE BAL.	SCREEN	SET UP		OPTION
	H SHIFT		:	64
	V SHIFT		:	64
	H. SIZE		:	32
	V. SIZE		:	32
	SCREEN DEFAULT

16