Runco CW-50MC GSS GET STATUS SETUP Gets menu and installer SETUP data, Order, Data, Size, Output

5) <GSS> (GET STATUS SETUP: Gets menu and installer SETUP data.)

Order	Data	Size			Output		Remarks
1	GAMMA	1byte	1: GAMMA 2.0			2: GAMMA 1.8	#
			3: GAMMA 2.2			4: DRE MID
			5: DRE HIGH			6: DRE LOW
			7: HIGH CNT.
2	BRT. ENHANCE	1byte	0:OFF	1: ON			#
3	SUB VOLUME	2byte	00 to 20
4	COLOR TEMP.	1byte	1: LOW		2: MID LOW		#
			3: MIDDLE		4: MID HIGH
			5: HIGH
5	VIDEO NR	1byte	0: OFF		2: LOW		#
			3: MIDDLE		4: HIGH
6	MPEG NR	1byte	0: OFF		2: LOW		#
			3: MIDDLE		4: HIGH
7	CTI	1byte	0: OFF	1: ON			# (color transient improvement)
8	CINEMAMODE	1byte	0: OFF	1: STANDARD			#
			2: ADVANCE
9	COLOR DECODING	1byte	1: RGB	1: COMPONENT1			#
			2: COMPONENT2
10	COLOR SYSTEM	1byte	1: AUTO		2: NTSC 3: PAL		#
			4: SECAM		5: 4.43NTSC
			6: PAL M		7: PAL N
11	SIGNAL FORMAT	3byte					# See below
12	Dummy data	3byte
13	Input function data (main)	3byte
14	Screen size data	1byte
15	Check sum	2byte
	SIGNAL FORMAT		S01 .................... VGA or XGA or SXGA or 720-PC
						(720-PC can be selected only when a video card is mounted.)
			S02 .................... WVGA or WXGA or SXGA+
			S03			535p or 750p (Either one can be selected only when a video
						card is mounted.) or PC AUTO

***.................... Dummy data is output for signals other than those above.

•13 and 14 output the same contents as GST items 3 and 5.

•Dummy data is output for setting data that cannot be output depending on the type of # signal.

30