Runco CW-50MC manual PLN BRT. Enhance OFF

	Name	Full Name	Adjustment	Validity	Direct	Function
	Command		RS-232C	Normal	Numerical
			Validity		Validity
P	PLN	BRT. ENHANCE: OFF	○			Turns the center brightness enhancement OFF.
	PLY	BRT. ENHANCE: ON	○			Turns the center brightness enhancement ON.
	POF	-	○	○		Power OFF.
	PON	-		○		Power ON.
	PUC	CINEMAMODE: ######	●			Displays the current CINEMAMODE setting.
	PUCS00	CINEMAMODE: OFF	○			Turns CINEMAMODE OFF.
	PUCS01	CINEMAMODE: STANDARD	○			Sets CINEMAMODE to STANDARD.
	PUCS02	CINEMAMODE: ADVANCE	○			Sets CINEMAMODE to ADVANCED.
R	RHI	R. GAIN: ***	○		○	Adjusts R. HIGH.
	RLW	R. OFFSET: ***	○		○	Adjusts R. LOW.
	RSL	R SIDEBAR ADJ. LEVEL: ***	○		○	Adjusts the RED side mask.
S	SFT	SIGNAL FORMAT: ####	●			Displays the current SIGNAL FORMAT.
	SFTS01	SIGNAL FORMAT:	○			Sets the SIGNAL FORMAT to PC FORMAT 1
		VGA or XGA or SXGA or 720PC				(VGA or XGA or SXGA or 720PC).
	SFTS02	SIGNAL FORMAT:	○			Sets the SIGNAL FORMAT to PC FORMAT 2
		WVGA or WXGA or SXGA+				(WVGA or WXGA or SXGA+).
	SFTS03	SIGNAL FORMAT:	○			Sets the SIGNAL FORMAT to VIDEO 525p or VIDEO 750p.
		VIDEO 525p or VIDEO 750p
	SFTS04	SIGNAL FORMAT: PC AUTO	○			Sets the SIGNAL FORMAT to PC AUTO.
	SHP	SHARPNESS: ***	○	○		Adjusts the SHARPNESS.
	SIM	SIDEBAR ADJ. MODE: ######	●			Displays the current side mask setting.
	SIM01	SIDEBAR ADJ. MODE: NORMAL	○			Sets the sidebar adjustment setting to normal.
	SIM02	SIDEBAR ADJ.: OVERLAY1	○			Sets the sidebar adjustment setting to OVERLAY1.
	SIM03	SIDEBAR ADJ.: OVERLAY2	○			Sets the sidebar adjustment setting to OVERLAY2.
	SLN	-		○		Turns the STILL setting to OFF.
	SLY	STILL		○		Turns the STILL setting to ON.
	SSI	########	●	●		Displays the current sub screen input finction.
	SSIS01	INPUT1(SUB)	○	○		Switches the sub screen to INPUT1.
	SSIS02	INPUT2(SUB)	○	○		Switches the sub screen to INPUT2.
	SSIS03	INPUT3(SUB)	○	○		Switches the sub screen to INPUT3.
	SSIS04	INPUT4(SUB)	○	○		Switches the sub screen to INPUT4.
	SSIS05	INPUT5(SUB)	○	○		Switches the sub screen to INPUT5.
	STD	STANDARD W/B	○			Returns the integrator PICTURE and WHITE BALACE to the factory
						settings.
	SVL	SUB VOLUME: ***	○		○	Adjusts the sub volume.
	SZM	########	●	●		Displays the current screen size setting.
	SZMS00	PIX by PIX or PARTIAL	○	○		Sets the scree size to PIX by PIX or PARTIAL.
	SZMS01	STD (4:3)	○	○		Sets the screen size to Standard 4:3.
	SZMS02	ANAMPHC 16:9	○	○		Sets the screen size to Anamorphic 16:9
	SZMS03	LETTERBOX	○	○		Sets the screen size to LETTERBOX.
	SZMS04	CINEMA	○	○		Sets the screen size to CINEMA.
	SZMS05	VIRTUALWIDE	○	○		Sets the screen size to VIRTUALWIDE.
	SZMS08	FULL1035i	○	○		Sets the screen size to FULL1035i.
	SZMS09	UNDERSCAN	○			Sets the screen size to UNDERSCAN.
T	TNT	TINT: ***	○		○	Adjusts the TINT.

*NOTE: Make sure to use commands for adjusting sub-volume (SV1~5) after first switching to the prescribed input using the input switching commands (IN1~5).

26