Windows NT 4.0 Software Installation
1. Go to the Start menu of Windows NT 4.0, then up to Settings and select Printers. In the Printers window,
2. The first window of the Add Printer Wizard will ask if the printer is connected to the local computer (“My Computer”) or to a Network Printer Server.
Select “My Computer” unless the printer that you are selecting is attached to another PC or accessed via an NT or Win2000 server.
Note: If setting up the printer as a stand- alone Ethernet network device, select “My Computer” at this point and install the driver as if the printer were connected to the parallel (LPT1:) port of the PC. After the installation, refer to the NT 4.0 section in Chapter 7 of this manual (Networking the Elite 21 Series Printer) for instructions on configuring the printer as a network device.
Click Next.
