Windows 2000 Software Installation
1. Go to the Start menu of Windows 2000, then up to Settings and select Printers. In the Printers window,
Click “Next” at the Add Printer Wizard welcome screen.
2. The next window of the Add Printer Wizard will ask if the printer is connected to the local computer or to a Network Printer Server.
Select “Local Printer” unless the printer that you are selecting is attached to another PC or accessed via an NT or 2000 server. De- select the box marked “Automatically detect and install my Plug and Play printer.” Click Next.
Note: If setting up the printer as a stand- alone Ethernet network device, select “Local Printer” at this point and install the driver as if the printer were connected to the parallel (LPT1:) port of the PC. After the installation, refer to the Windows 2000 section of Chapter 7 of this manual (Networking the Elite 21 Series Printer) for instructions on configuring the printer as a network device.
